- New
TBWOODS 10SCHS118 10SC-HSX1 1/8 SF Hub
- Write a review
$160.27
Bore size1 1/8"Bore size (in)1 1/8Bore tolerance+.0005 to +.0015Capscrew sizeQty 4 -- 7/16 x 2 1/2Capscrew size (in)Qty 4 -- 7/16 x 2 1/2Capscrew torque requirement50 in-lbsCapscrew torque requirment (ft lbs)50Component WR2 (lbs ft2)0.1052Component WR²0.1052Construction typeFinish bore with keywayCoupling size10Dimension (in) (C)1-21/32Dimension (in) (H)4 3/8Dimension (in) (S)3/4Horsepower Rating at 100 RPM61Keyseat (in)1/4 x 1/8Keyseat size1/4 in x 1/8 inLength through bore1.65625Material typeHigh strength cast ironMax angular gap misalignment0.128 (in) with EPDM/Neoprene Sleeves and 0.032 (in) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size3.375Max parallel misalignment12Max RPM3600Max speed3600Min compatible bore size0.4375Power rating at 100 RPM4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeveScrew sizeSetscrewScrew typeHub, spacerSet screw distance0.75Setscrew length1Setscrew length (in)1Setscrew size, location1/2 13 UNC, over keyseatSetscrew torque requirement50Setscrew Torque Requirment (ft lbs)50SF hub diameter4.375Torque3,735 in-lb with EPDM or Neoprene sleeve, 11,350 in-lb with Hytrel sleeveTorque rate3,735 (in-lbs) with EPDM or Neoprene sleeve; 11,350 (in-lbs) with Hytrel sleeve
Specifications
| Bore size | 1 1/8" |
| Bore size (in) | 1 1/8 |
| Bore tolerance | +.0005 to +.0015 |
| Capscrew size | Qty 4 -- 7/16 x 2 1/2 |
| Capscrew size (in) | Qty 4 -- 7/16 x 2 1/2 |
| Capscrew torque requirement | 50 in-lbs |
| Capscrew torque requirment (ft lbs) | 50 |
| Component WR2 (lbs ft2) | 0.1052 |
| Component WR² | 0.1052 |
| Construction type | Finish bore with keyway |
| Coupling size | 10 |
| Dimension (in) (C) | 1-21/32 |
| Dimension (in) (H) | 4 3/8 |
| Dimension (in) (S) | 3/4 |
| Horsepower Rating at 100 RPM | 61 |
| Keyseat (in) | 1/4 x 1/8 |
| Keyseat size | 1/4 in x 1/8 in |
| Length through bore | 1.65625 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 0.128 (in) with EPDM/Neoprene Sleeves and 0.032 (in) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 3.375 |
| Max parallel misalignment | 12 |
| Max RPM | 3600 |
| Max speed | 3600 |
| Min compatible bore size | 0.4375 |
| Power rating at 100 RPM | 4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeve |
| Screw size | Setscrew |
| Screw type | Hub, spacer |
| Set screw distance | 0.75 |
| Setscrew length | 1 |
| Setscrew length (in) | 1 |
| Setscrew size, location | 1/2 13 UNC, over keyseat |
| Setscrew torque requirement | 50 |
| Setscrew Torque Requirment (ft lbs) | 50 |
| SF hub diameter | 4.375 |
| Torque | 3,735 in-lb with EPDM or Neoprene sleeve, 11,350 in-lb with Hytrel sleeve |
| Torque rate | 3,735 (in-lbs) with EPDM or Neoprene sleeve; 11,350 (in-lbs) with Hytrel sleeve |
10SCHS118
