- New
TBWOODS 11S60MM 11SX60MM SF Flange
- Write a review
$200.35
Bore size60 mmBore size (mm)60 mmBore tolerance+.030 to +.060Bore tolerance (in)+0.0005 to +0.0020Component WR2 (lbs ft2)0.9739Component WR²0.9739Construction typeFinish bore with keywayCoupling size11Dimension (in) (C)3-7/16Dimension (in) (D)8.625Dimension (in) (H)5 1/4Dimension (in) (S)3/4Dimension (in) (T)1 1/2Dimension (in.) (E)1 1/8Flange diameter8.625Horsepower Rating at 100 RPM9.4 HP with EPDM or Neoprene sleeve, 29 HP with Hytrel sleeveKeyseat (mm)18mm x 4.4mmKeyseat size18 mm x 4.4 mmLength through bore87Material typeHigh strength cast ironMax angular gap misalignment3.89 (mm) with EPDM/Neoprene Sleeves and 0.94 (mm) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size98Max parallel misalignment15Max RPM3600Max speed3600Min compatible bore size13Outside diameter219Power rating at 100 RPM7.0 kW with EPDM or Neoprene sleeve, 21 kW with Hytrel sleeveScrew sizeSetscrewScrew typeFlange, Type SSet screw distance19Setscrew length12Setscrew length (mm)12 mmSetscrew size, locationM10 x 1.50 , One over KS and at 90 DegreesSetscrew torque requirement31Setscrew Torque Requirment (ft lbs)23SF flange length38SF hub diameter133SF hub length29Torque666 Nm with EPDM or Neoprene sleeve, 2,034 Nm with Hytrel sleeveTorque rate666 (Nm) with EPDM or Neoprene sleeve; 2,034 (Nm) with Hytrel sleeve
Specifications
| Bore size | 60 mm |
| Bore size (mm) | 60 mm |
| Bore tolerance | +.030 to +.060 |
| Bore tolerance (in) | +0.0005 to +0.0020 |
| Component WR2 (lbs ft2) | 0.9739 |
| Component WR² | 0.9739 |
| Construction type | Finish bore with keyway |
| Coupling size | 11 |
| Dimension (in) (C) | 3-7/16 |
| Dimension (in) (D) | 8.625 |
| Dimension (in) (H) | 5 1/4 |
| Dimension (in) (S) | 3/4 |
| Dimension (in) (T) | 1 1/2 |
| Dimension (in.) (E) | 1 1/8 |
| Flange diameter | 8.625 |
| Horsepower Rating at 100 RPM | 9.4 HP with EPDM or Neoprene sleeve, 29 HP with Hytrel sleeve |
| Keyseat (mm) | 18mm x 4.4mm |
| Keyseat size | 18 mm x 4.4 mm |
| Length through bore | 87 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 3.89 (mm) with EPDM/Neoprene Sleeves and 0.94 (mm) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 98 |
| Max parallel misalignment | 15 |
| Max RPM | 3600 |
| Max speed | 3600 |
| Min compatible bore size | 13 |
| Outside diameter | 219 |
| Power rating at 100 RPM | 7.0 kW with EPDM or Neoprene sleeve, 21 kW with Hytrel sleeve |
| Screw size | Setscrew |
| Screw type | Flange, Type S |
| Set screw distance | 19 |
| Setscrew length | 12 |
| Setscrew length (mm) | 12 mm |
| Setscrew size, location | M10 x 1.50 , One over KS and at 90 Degrees |
| Setscrew torque requirement | 31 |
| Setscrew Torque Requirment (ft lbs) | 23 |
| SF flange length | 38 |
| SF hub diameter | 133 |
| SF hub length | 29 |
| Torque | 666 Nm with EPDM or Neoprene sleeve, 2,034 Nm with Hytrel sleeve |
| Torque rate | 666 (Nm) with EPDM or Neoprene sleeve; 2,034 (Nm) with Hytrel sleeve |
11S60MM
