Zero Max 6A26-A1C CD CPLG ALUM SERVO HUB STYLE
- Write a review
$342.32
Angular misalignment2Axial misalignment0.043 inches, 1.1 mmClamp Bolt Size (D)M8Clamp Screw to Bore (R)0.95 inches, 24.0 mmClamp Screw to End of Hub (G)0.36 inches, 9.1 mmContinuous Rated Torque475 in-lbs, 53 NmDistance Between Shaft Ends (C)0.25 inches, 6.2 mmHub Length (B)1.16 inches, 29.5 mmInertia at Max Bore1.20 lb-in, 3.5 kg-cmInertia at Min Bore1.26 lb-in, 3.7 kg-cmInside Diameter of Disc-Pack (H)1.00 inches, 25.4 mmMax Speed11, 500 RPMMaximum Bore (E)1.375 inches, 35 mmMinimum Bore (E)0.563 inches, 14 mmOutside Diameter (A)2.74 inches, 69.5 mmOverall Length2.57 inches, 65.2 mmParallel misalignment0.008 inches, 0.20 mmPeak Rated Torque950 in-lbs, 106 NmTightening Torque (D)283 in-lbs, 32 NmTorsional stiffness20, 068 Nm/radWeight at Max Bore1.01 lbs, 0.46 kgWeight at Min Bore1.32 lbs, 0.60 kg
Specifications
| Angular misalignment | 2 |
| Axial misalignment | 0.043 inches, 1.1 mm |
| Clamp Bolt Size (D) | M8 |
| Clamp Screw to Bore (R) | 0.95 inches, 24.0 mm |
| Clamp Screw to End of Hub (G) | 0.36 inches, 9.1 mm |
| Continuous Rated Torque | 475 in-lbs, 53 Nm |
| Distance Between Shaft Ends (C) | 0.25 inches, 6.2 mm |
| Hub Length (B) | 1.16 inches, 29.5 mm |
| Inertia at Max Bore | 1.20 lb-in, 3.5 kg-cm |
| Inertia at Min Bore | 1.26 lb-in, 3.7 kg-cm |
| Inside Diameter of Disc-Pack (H) | 1.00 inches, 25.4 mm |
| Max Speed | 11, 500 RPM |
| Maximum Bore (E) | 1.375 inches, 35 mm |
| Minimum Bore (E) | 0.563 inches, 14 mm |
| Outside Diameter (A) | 2.74 inches, 69.5 mm |
| Overall Length | 2.57 inches, 65.2 mm |
| Parallel misalignment | 0.008 inches, 0.20 mm |
| Peak Rated Torque | 950 in-lbs, 106 Nm |
| Tightening Torque (D) | 283 in-lbs, 32 Nm |
| Torsional stiffness | 20, 068 Nm/rad |
| Weight at Max Bore | 1.01 lbs, 0.46 kg |
| Weight at Min Bore | 1.32 lbs, 0.60 kg |
6A26-A1C
