- New
Zero Max 6P22-A1C CD CPLG ALUM SERVO HUB DBL FLX
- Write a review
$463.35
Angular misalignment2Axial misalignment0.071 inches, 1.8 mmClamp Bolt Size (D)M6Clamp Screw to Bore (R)0.87 inches, 22.0 mmClamp Screw to End of Hub (G)0.29 inches, 7.2 mmContinuous Rated Torque270 in-lbs, 30 NmDistance Between Shaft Ends (C)0.91 inches, 23.0 mmHub Length (B)1.02 inches, 26.0 mmInertia at Max Bore0.75 lb-in, 2.2 kg-cmInertia at Min Bore0.82 lb-in, 2.4 kg-cmInside Diameter of Disc-Pack (H)0.98 inches, 24.9 mmMax Speed13, 500 RPMMaximum Bore (E)1.188 inches, 31 mmMinimum Bore (E)0.500 inches, 12 mmOutside Diameter (A)2.44 inches, 62.0 mmOverall Length2.95 inches, 75.0 mmParallel misalignment0.023 inches, 0.58 mmPeak Rated Torque540 in-lbs, 60 NmTightening Torque (D)115 in-lbs, 13 NmTorsional stiffness8, 482 Nm/radWeight at Max Bore0.86 lbs, 0.39 kgWeight at Min Bore1.04 lbs, 0.47 kg
Specifications
| Angular misalignment | 2 |
| Axial misalignment | 0.071 inches, 1.8 mm |
| Clamp Bolt Size (D) | M6 |
| Clamp Screw to Bore (R) | 0.87 inches, 22.0 mm |
| Clamp Screw to End of Hub (G) | 0.29 inches, 7.2 mm |
| Continuous Rated Torque | 270 in-lbs, 30 Nm |
| Distance Between Shaft Ends (C) | 0.91 inches, 23.0 mm |
| Hub Length (B) | 1.02 inches, 26.0 mm |
| Inertia at Max Bore | 0.75 lb-in, 2.2 kg-cm |
| Inertia at Min Bore | 0.82 lb-in, 2.4 kg-cm |
| Inside Diameter of Disc-Pack (H) | 0.98 inches, 24.9 mm |
| Max Speed | 13, 500 RPM |
| Maximum Bore (E) | 1.188 inches, 31 mm |
| Minimum Bore (E) | 0.500 inches, 12 mm |
| Outside Diameter (A) | 2.44 inches, 62.0 mm |
| Overall Length | 2.95 inches, 75.0 mm |
| Parallel misalignment | 0.023 inches, 0.58 mm |
| Peak Rated Torque | 540 in-lbs, 60 Nm |
| Tightening Torque (D) | 115 in-lbs, 13 Nm |
| Torsional stiffness | 8, 482 Nm/rad |
| Weight at Max Bore | 0.86 lbs, 0.39 kg |
| Weight at Min Bore | 1.04 lbs, 0.47 kg |
6P22-A1C
