TBWOODS 11SC48 SF Flange
- Write a review
$255.25
Component WR2 (lbs ft2)0.8100Component WR²0.81Coupling size11Dimension (in) (D)8.625Dimension (in) (H)5 1/4Dimension (in) (L)1 1/2Dimension (in) (T)1 1/2Dimension (in.) (E)1/32Distance betewwn shaft (in)4 3/4Distance between shaft4.75Flange diameter8.625Horsepower Rating at 100 RPM9.4 HP with EPDM or Neoprene sleeve, 29 HP with Hytrel sleeveLength38Length through bore1.5Material typeHigh strength cast ironMax angular gap misalignment0.151 (in) with EPDM/Neoprene Sleeves and 0.037 (in) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size3.875Max parallel misalignment15Max RPM3600Max speed3600Min compatible bore size0.5Outside diameter8.625Power rating at 100 RPM7.0 kW with EPDM or Neoprene sleeve, 21 kW with Hytrel sleeveScrew typeFlange, SpacerSF flange length1.5SF hub diameter5.25SF hub length1/32Spacer hub required11SCH x Bore Spacer HubTorque5,890 in-lb with EPDM or Neoprene sleeve, 18,000 in-lb with Hytrel sleeveTorque rate5,890 (in-lbs) with EPDM or Neoprene sleeve; 18,000 (in-lbs) with Hytrel sleeve
Specifications
| Component WR2 (lbs ft2) | 0.8100 |
| Component WR² | 0.81 |
| Coupling size | 11 |
| Dimension (in) (D) | 8.625 |
| Dimension (in) (H) | 5 1/4 |
| Dimension (in) (L) | 1 1/2 |
| Dimension (in) (T) | 1 1/2 |
| Dimension (in.) (E) | 1/32 |
| Distance betewwn shaft (in) | 4 3/4 |
| Distance between shaft | 4.75 |
| Flange diameter | 8.625 |
| Horsepower Rating at 100 RPM | 9.4 HP with EPDM or Neoprene sleeve, 29 HP with Hytrel sleeve |
| Length | 38 |
| Length through bore | 1.5 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 0.151 (in) with EPDM/Neoprene Sleeves and 0.037 (in) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 3.875 |
| Max parallel misalignment | 15 |
| Max RPM | 3600 |
| Max speed | 3600 |
| Min compatible bore size | 0.5 |
| Outside diameter | 8.625 |
| Power rating at 100 RPM | 7.0 kW with EPDM or Neoprene sleeve, 21 kW with Hytrel sleeve |
| Screw type | Flange, Spacer |
| SF flange length | 1.5 |
| SF hub diameter | 5.25 |
| SF hub length | 1/32 |
| Spacer hub required | 11SCH x Bore Spacer Hub |
| Torque | 5,890 in-lb with EPDM or Neoprene sleeve, 18,000 in-lb with Hytrel sleeve |
| Torque rate | 5,890 (in-lbs) with EPDM or Neoprene sleeve; 18,000 (in-lbs) with Hytrel sleeve |
11SC48
