- New
TBWOODS 10S45MM 10SX45MM SF Flange
- Write a review
$118.72
Bore size45 mmBore size (mm)45 mmBore tolerance+.025 to +.050Bore tolerance (in)+0.0005 to +0.0015Component WR2 (lbs ft2)0.4853Component WR²0.4853Construction typeFinish bore with keywayCoupling size10Dimension (in) (C)2 23/32Dimension (in) (D)7.5Dimension (in) (H)4- 3/8Dimension (in) (S)7/16Dimension (in) (T)1 7/32Dimension (in.) (E)13/16Flange diameter7.5Horsepower Rating at 100 RPM61Keyseat (mm)14mm x 3.8mmKeyseat size14 mm x 3.8 mmLength through bore69Material typeHigh strength cast ironMax angular gap misalignment3.21 (mm) with EPDM/Neoprene Sleeves and 0.81 (mm) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size85Max parallel misalignment12Max RPM3600Max speed3600Min compatible bore size12Outside diameter191Power rating at 100 RPM4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeveScrew sizeSetscrewScrew typeFlange, Type SSet screw distance16Setscrew length16Setscrew length (mm)16 mmSetscrew size, locationM10 x 1.50, One over KS and at 90 DegreesSetscrew torque requirement31Setscrew Torque Requirment (ft lbs)23SF flange length31SF hub diameter111SF hub length21Torque422 Nm with EPDM or Neoprene sleeve, 1,282 Nm with Hytrel sleeveTorque rate422 (Nm) with EPDM or Neoprene sleeve; 1,282 (Nm) with Hytrel sleeve
Specifications
| Bore size | 45 mm |
| Bore size (mm) | 45 mm |
| Bore tolerance | +.025 to +.050 |
| Bore tolerance (in) | +0.0005 to +0.0015 |
| Component WR2 (lbs ft2) | 0.4853 |
| Component WR² | 0.4853 |
| Construction type | Finish bore with keyway |
| Coupling size | 10 |
| Dimension (in) (C) | 2 23/32 |
| Dimension (in) (D) | 7.5 |
| Dimension (in) (H) | 4- 3/8 |
| Dimension (in) (S) | 7/16 |
| Dimension (in) (T) | 1 7/32 |
| Dimension (in.) (E) | 13/16 |
| Flange diameter | 7.5 |
| Horsepower Rating at 100 RPM | 61 |
| Keyseat (mm) | 14mm x 3.8mm |
| Keyseat size | 14 mm x 3.8 mm |
| Length through bore | 69 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 3.21 (mm) with EPDM/Neoprene Sleeves and 0.81 (mm) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 85 |
| Max parallel misalignment | 12 |
| Max RPM | 3600 |
| Max speed | 3600 |
| Min compatible bore size | 12 |
| Outside diameter | 191 |
| Power rating at 100 RPM | 4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeve |
| Screw size | Setscrew |
| Screw type | Flange, Type S |
| Set screw distance | 16 |
| Setscrew length | 16 |
| Setscrew length (mm) | 16 mm |
| Setscrew size, location | M10 x 1.50, One over KS and at 90 Degrees |
| Setscrew torque requirement | 31 |
| Setscrew Torque Requirment (ft lbs) | 23 |
| SF flange length | 31 |
| SF hub diameter | 111 |
| SF hub length | 21 |
| Torque | 422 Nm with EPDM or Neoprene sleeve, 1,282 Nm with Hytrel sleeve |
| Torque rate | 422 (Nm) with EPDM or Neoprene sleeve; 1,282 (Nm) with Hytrel sleeve |
10S45MM
