Zero Max 6A18-AC CD CPLG ALUM SINGLE FLEX CLAMP
- Write a review
$321.07
Angular misalignment3Axial misalignment0.030 inches, 0.8 mmContinuous Rated Torque180 in-lbs, 20 NmDistance Between Shaft Ends (C)0.28 inches, 7.1 mmHub Length (B)0.810 inches, 20.6 mmInertia at 1/2 Max Bore0.13 lb-in, 0.38 kg-cmInertia at Max Bore0.15 lb-in, 0.44 kg-cmInside Diameter of Disc-Pack (H)0.79 inches, 20.1 mmMax Speed15, 000 RPMMaximum Bore (E) with Keyway0.625 inches, 16 mmMaximum Bore (E) without Keyway0.813 inches, 21 mmMaximum Clamp Collar Diameter (F)1.77 inches, 45 mmMaximum Clamp Collar Width (D)0.472 inches, 12 mmOutside Diameter (A)1.85 inches, 47.0 mmOverall Length1.88 inches, 47.8 mmParallel misalignment0.004 inches, 0.10 mmPeak Rated Torque360 in-lbs, 40 NmTorsional stiffness11, 650 Nm/radWeight at 1/2 Max Bore0.31 lbs, 0.14 kgWeight at Max Bore0.32 lbs, 0.15 kg
Specifications
| Angular misalignment | 3 |
| Axial misalignment | 0.030 inches, 0.8 mm |
| Continuous Rated Torque | 180 in-lbs, 20 Nm |
| Distance Between Shaft Ends (C) | 0.28 inches, 7.1 mm |
| Hub Length (B) | 0.810 inches, 20.6 mm |
| Inertia at 1/2 Max Bore | 0.13 lb-in, 0.38 kg-cm |
| Inertia at Max Bore | 0.15 lb-in, 0.44 kg-cm |
| Inside Diameter of Disc-Pack (H) | 0.79 inches, 20.1 mm |
| Max Speed | 15, 000 RPM |
| Maximum Bore (E) with Keyway | 0.625 inches, 16 mm |
| Maximum Bore (E) without Keyway | 0.813 inches, 21 mm |
| Maximum Clamp Collar Diameter (F) | 1.77 inches, 45 mm |
| Maximum Clamp Collar Width (D) | 0.472 inches, 12 mm |
| Outside Diameter (A) | 1.85 inches, 47.0 mm |
| Overall Length | 1.88 inches, 47.8 mm |
| Parallel misalignment | 0.004 inches, 0.10 mm |
| Peak Rated Torque | 360 in-lbs, 40 Nm |
| Torsional stiffness | 11, 650 Nm/rad |
| Weight at 1/2 Max Bore | 0.31 lbs, 0.14 kg |
| Weight at Max Bore | 0.32 lbs, 0.15 kg |
6A18-AC
