SKFSEAL 448-548-32 HS5 V FKM single lip Flex design S.S. spring oil seal
- Write a review
$425.00
Auxiliary lipNoDesignHS5Housing bore diameter146.05 mm, 5.75 inHousing groove width12.7 mm, 0.5 inMaximum operating temperature200.0 °C, 392.0 °FMaximum operating temperature (°F)200.0 °C, 392.0Minimum operating temperature-18.0 °C, -0.4 °FMinimum operating temperature (°F)-18.0 °C, -0.4Permissible circumferential speed13.0 m/sRotational speed2058.0 r/minSealing lip materialFluoro rubber (FKM)Shaft diameter120.65 mm, 4.75 inType of outside diameterAll-rubberUnit systemInch
Specifications
| Auxiliary lip | No |
| Design | HS5 |
| Housing bore diameter | 146.05 mm, 5.75 in |
| Housing groove width | 12.7 mm, 0.5 in |
| Maximum operating temperature | 200.0 °C, 392.0 °F |
| Maximum operating temperature (°F) | 200.0 °C, 392.0 |
| Minimum operating temperature | -18.0 °C, -0.4 °F |
| Minimum operating temperature (°F) | -18.0 °C, -0.4 |
| Permissible circumferential speed | 13.0 m/s |
| Rotational speed | 2058.0 r/min |
| Sealing lip material | Fluoro rubber (FKM) |
| Shaft diameter | 120.65 mm, 4.75 in |
| Type of outside diameter | All-rubber |
| Unit system | Inch |
448-548-32 HS5 V