TIMKEN 710024 Small Bore Inch Seal
- Write a review
$9.05
57.15 mm Outer Diameter2.255 in57.277 mm Overall width0.25 in6.35 mm Series710000 Shaft Size:1-3/4 inDisclaimerCAD Models / Sales Drawings are accurate envelope dimensions. Internal features such as lip position may vary from seal to seal and are only representative.Housing bore2.25 inHousing Bore2.25 in 57.15 mmInch/MetricInchMaterialUrethaneOuter Diameter2.255 in 57.277 mmOverall Width0.25 in 6.35 mmSeries710000Shaft Size1-3/4 in 44.45 mm
Specifications
| Ability to Relubricate | Yes |
| Bearing Insert Finish | Black Oxide |
| Bearing Insert Material | 52100 Bearing Steel |
| Bearing Type | Standard Duty |
| Bolt Size (in) | 9/16 |
| Bolt Spacing (in) | 6.188 |
| Bore Diameter (mm) | 50 |
| Bore Shape | Straight |
| Cage Material | PPS - Polyphenylene Sulfide |
| Cage Type | Land Riding Retainer |
| Dynamic Load Rating (lb) | 7889 |
| End Cap | No |
| Fixed vs. Expansion | Fixed |
| Foot Height (in) | 0.56 |
| Grease Fitting Thread Size | 1/8 NPT |
| Height | 7.5 |
| Housing | Flange, Two Bolt |
| Housing Coating | Powder Coated |
| Housing Color | Black |
| Housing Construction | One Piece |
| Housing Material | Cast Iron |
| Housing Style | Flange Block |
| Inner Race Heat Treat Method | Zone-Hardened |
| Inner Ring OD (in) | 2.469 |
| Insert | 5210 |
| Length | 2.31 |
| Length Through Bore (in) | 2.031 |
| Lubricant | Lithium Complex NLGI 2 Grease |
| Max Operating Temperature (C) | 104 |
| Max Operating Temperature (F) | 220 |
| Maximum Speed (RPM) | 3550 |
| Misalignment Capability | ±2.0° Misalignment - Static Only |
| Misalignment Type | Static Only |
| Outer Ring Land Profile | Standard |
| Overall Height (in) | 2.157 |
| Overall Length (in) | 7.44 |
| Overall Width (in) | 4.56 |
| Pilot Configuration | No Pilot |
| Radial Clearance | Standard |
| Rolling element | Ball Bearing |
| Seal | Felt Labyrinth Seal |
| Shaft Locking Type | Set Screw |
| Size Code | 2-115 |
| Static Load Rating (lb) | 5216 |
| Width | 4.63 |
710024
