TIMKEN 801500 V-Seal
- Write a review
$21.28
1.524 mm Overall width0.5 in10.414 mm Fitted Width Tolerance0.06 in12.7 mm Shaft Size Maximum6.1 in145.034 mm Width on Shaft0.31 in154.94 mm Shaft Size Minimum5.71 in7.112 mm Fitted Width0.41 inCross Section Height0.28 inFitted Width0.41 inFitted Width Tolerance0.06 inInch/MetricInchMaterialNitrileOverall Width0.5 inShaft Size Maximum6.1 inShaft Size Minimum5.71 inWidth on Shaft0.31 in
Specifications
| Backlash | 0.38 ° |
| Bore details | Straight |
| Bore size | 0.875 in, Machined Bore with Clamp Collar and Keyway |
| Bore style | Machined Bore with Clamp Collar and Keyway |
| Cable length | 2 m |
| CE certified | CE |
| Clutch air chamber volume when new | 0.780 in³ |
| Clutch response factor | 0.057 |
| Drive inertia | 13.54 lbin² |
| Engagement method | Air |
| Finish | Black oxide |
| Hose length | 8.25 in |
| Housing type | Open |
| Inlet size | 0.125 NPT |
| Input keyway | 0.189 in Square |
| Input shaft securement | Clamp Collar Pilot End Only |
| Length | 5.60 in |
| Materials of construction | Bare Machined Aluminum Air Chamber Black Oxide Pilot |
| Max ambient temperature (°F) | 150 |
| Max disengagement torque | 860 inlb |
| Max operating pressure (psi) | 80 |
| Max Speed | 1800 RPM |
| Min ambient temperature (°F) | 32 |
| Min disengagement torque | 210 inlb |
| Min engagement pressure (psi) | 15 |
| Min sprocket size | 35/40T, 40/30T, 50/24T, 60/21T |
| Number of engagement positions | 1, @ 360° |
| Number of sensors | 1 |
| Outer Diameter | 4.56 in |
| Output bolt circle | 3.562 in |
| Output bolt hole size | 6 0.313-18 in, Holes @ 60° |
| Output type | Pilot |
| Pilot size | 2.874 in |
| Product features | Air Engaged, Shaft Mount, Straight Bore, Single Position, Clamp Collar |
| Release method | Spring |
| Restrictions | Consult Nexen For Engagement at Differential Speeds |
| RoHS compliant | RoHS |
| Sensor 1 function | Disengagement |
| Sensor 1 output | Normally Open PNP |
| Sensor 1 type | Inductive Proximity |
| Sensor function | Disengagement |
| Shaft inertia | 6.05 lbin² |
| Unit height | 9 in |
| Unit width | 7 in |
801500
