TIMKEN 710363 Small Bore Inch Seal
- Write a review
$48.75
Specifications
| Ability to Relubricate | Yes |
| Bearing Insert Finish | Black Oxide |
| Bearing Insert Material | 52100 Bearing Steel |
| Bearing Type | Standard Duty |
| Bolt Size (in) | 7/16 |
| Bolt Spacing (in) | 4.594 |
| Bolt Spacing (mm) | 116.7 |
| Bore Diameter (mm) | 30 |
| Bore Shape | Straight |
| Cage Material | PPS - Polyphenylene Sulfide |
| Cage Type | Land Riding Retainer |
| Dynamic Load Rating (lb) | 4381 |
| End Cap | No |
| Fixed vs. Expansion | Fixed |
| Foot Height (in) | 0.53 |
| Grease Fitting Thread Size | 1/4-28 |
| Height | 5.75 |
| Housing | Flange, Two Bolt |
| Housing Coating | Powder Coated |
| Housing Color | Black |
| Housing Construction | One Piece |
| Housing Material | Cast Iron |
| Housing Style | Flange Block |
| Inner Race Heat Treat Method | Zone-Hardened |
| Inner Ring OD (in) | 1.587 |
| Insert | 5206C |
| Length | 3.5 |
| Length Through Bore (in) | 1.5 |
| Lubricant | Lithium Complex NLGI 2 Grease |
| Max Operating Temperature (F) | 220 |
| Maximum Speed (RPM) | 5450 |
| Misalignment Capability | ±2.0° Misalignment - Static Only |
| Misalignment Type | Static Only |
| Outer Ring Land Profile | Standard |
| Overall Height (in) | 1.563 |
| Overall Length (in) | 5.56 |
| Overall Length (mm) | 141.3 |
| Overall Width (in) | 3.25 |
| Pilot Configuration | No Pilot |
| Radial Clearance | Standard |
| Rolling element | Ball Bearing |
| Seal | Single Lip Contact Seal |
| Setscrew Torque (in-lbs) | 85 |
| Shaft Locking Type | Set Screw |
| Size Code | 2-13 |
| Static Load Rating (lb) | 2567 |
| Vibration Frequency Fundamental Train | 0.007 |
| Vibration Frequency Inner Ring Defect | 0.091 |
| Vibration Frequency Outer Ring Defect | 0.06 |
| Vibration Frequency Roller Spin | 0.039 |
| Width | 1.69 |
