TIMKEN 710123 Small Bore Inch Seal
- Write a review
$22.56
11 mm Overall width with side lip0.669 in17 mm Series710100 Shaft Size:1.535 in57 mm Outer Diameter2.252 in57.2 mm Overall width0.433 inDisclaimerCAD Models / Sales Drawings are accurate envelope dimensions. Internal features such as lip position may vary from seal to seal and are only representative.Housing bore2.244 inHousing Bore2.244 in 57 mmInch/MetricMETRICMaterialPolyacrylateOuter Diameter2.252 in 57.2 mmOverall Width0.433 in 11 mmOverall Width with Side Lip0.669 in 17 mmSeal Type40Series710100Shaft Size1.535 in 39 mm
Specifications
| Ability to Relubricate | Yes |
| Base to Center Height (in) | 3 |
| Bearing Centerline to Bolt Hole Center (in) | 1.688 |
| Bearing Insert Finish | Black Oxide |
| Bearing Insert Material | 52100 Bearing Steel |
| Bearing Type | Standard Duty |
| Bolt Size (in) | 3/8 |
| Bolt Spacing (in) | 1.5 |
| Bolt Spacing Height Direction (in) | 0.875 |
| Bore Diameter (mm) | 20 |
| Bore Shape | Straight |
| Cage Material | PPS - Polyphenylene Sulfide |
| Cage Type | Land Riding Retainer |
| Dynamic Load Rating (lb) | 2611 |
| End Cap | No |
| Fixed vs. Expansion | Fixed |
| Foot Height (in) | 0.31 |
| Grease Fitting Thread Size | 1/4-28 |
| Height | 3.94 |
| Housing | Flange, Bracket, Three Bolt |
| Housing Coating | Powder Coated |
| Housing Color | Black |
| Housing Construction | One Piece |
| Housing Material | Cast Iron |
| Housing Style | Flange Block |
| Housing Width (in) | 2.38 |
| Inner Race Heat Treat Method | Zone-Hardened |
| Inner Ring OD (in) | 1.192 |
| Insert | 5204 |
| Length | 1.5 |
| Length Through Bore (in) | 1.219 |
| Lubricant | Lithium Complex NLGI 2 Grease |
| Max Operating Temperature (F) | 220 |
| Maximum Speed (RPM) | 7300 |
| Misalignment Capability | ±2.0° Misalignment - Static Only |
| Misalignment Type | Static Only |
| Outer Ring Land Profile | Standard |
| Overall Height (in) | 1.34 |
| Overall Length (in) | 4.19 |
| Overall Width (in) | 2.38 |
| Pilot Configuration | No Pilot |
| Radial Clearance | Standard |
| Rolling element | Ball Bearing |
| Seal | Felt Labyrinth Seal |
| Shaft Locking Type | Set Screw |
| Size Code | 2-012 |
| Static Load Rating (lb) | 1444 |
| Vibration Frequency Fundamental Train | 0.007 |
| Vibration Frequency Inner Ring Defect | 0.091 |
| Vibration Frequency Outer Ring Defect | 0.059 |
| Vibration Frequency Roller Spin | 0.038 |
| Width | 4 |
710123
