SKFSEAL 44920 SMALL BORE SEALS
- Write a review
$33.05
Auxiliary lipNoDesignCRWH1Housing bore diameter136.55 mm, 5.376 inMaximum operating temperature100.0 °C, 212.0 °FMaximum operating temperature (°F)100.0 °C, 212.0Minimum operating temperature-40.0 °C, -40.0 °FMinimum operating temperature (°F)-40.0 °C, -40.0Permissible circumferential speed11.19 m/sRotational speed1860.0 r/minSeal width11.13 mm, 0.438 inSealing lip materialNitrile rubber (NBR)Shaft diameter114.3 mm, 4.5 inType of outside diameterMetal-cased with sealant coating on the outside diameterUnit systemInch
Specifications
| Applicable Materials | Alloy Steel, Stainless Steel, Titanium and Tool Steel |
| Cutting Depth | 3-3/16 in |
| Cutting Direction | Right Hand |
| Cutting Edge Material | M42 HSS-Co 8% |
| Drill Diameter Measurement System | Imperial |
| Drill Size - Decimal Inch | 0.3125 in |
| Drill Size - Fraction | 5/16 in |
| Finish | TiAlN Coated |
| Flute Length | 3-3/16 in |
| Flute Type | Right Spiral |
| Material | HSS-CO 8% (M42) |
| Number of Flutes | 2 |
| Overall Length | 4-1/2 in |
| Point Angle | 135 deg |
| Point Type | Split |
| Series | 550-TA |
| Shank Size | 5/16 in Dia x 1-5/16 in L |
| Shank Type | Straight |
| Style | 550-TA |
| Surface Condition | TiAlN |
| Through Coolant (Yes/No) | No |
| Tool Size | 5/16" |
| Type | Heavy Duty |
44920
