TIMKEN 710060 Small Bore Inch Seal
- Write a review
$54.94
118 mm Outer Diameter4.657 in118.29 mm Overall width0.335 in8.5 mm Series710000 Shaft Size:3.74 inDisclaimerCAD Models / Sales Drawings are accurate envelope dimensions. Internal features such as lip position may vary from seal to seal and are only representative.Helix typeCounter-Clockwise-Spiral Lip Design Housing bore:4.646 inHelix TypeCounter-Clockwise-Spiral Lip DesignHousing Bore4.646 in 118 mmInch/MetricMETRICMaterialSiliconeOuter Diameter4.657 in 118.29 mmOverall Width0.335 in 8.5 mmSeal Type32Series710000Shaft Size3.74 in 95 mm
Specifications
| Ability to Relubricate | Yes |
| Adjusting Screw Clearance Hole Diameter (in) | 1.13 |
| Adjusting Screw Square Nut Seat Height (in) | 1.94 |
| Base to Center Height (in) | 3.5 |
| Bearing Insert Finish | Black Oxide |
| Bearing Insert Material | 52100 Bearing Steel |
| Bearing Type | Standard Duty |
| Bore Diameter (mm) | 40 |
| Bore Shape | Straight |
| Cage Material | PPS - Polyphenylene Sulfide |
| Cage Type | Land Riding Retainer |
| Carriage Bolt Size (in) | 3/4 |
| Centerline to Outermost Bearing Face (in) | 1.189 |
| Dynamic Load Rating (lb) | 7340 |
| End Cap | No |
| Fixed vs. Expansion | Fixed |
| Grease Fitting Thread Size | 1/4-28 |
| Height | 7.5 |
| Housing | Take-Up Block, Wide Slot |
| Housing Bolt Through Hole (mm) | 28.6 |
| Housing Coating | Powder Coated |
| Housing Color | Black |
| Housing Construction | One Piece |
| Housing Material | Cast Iron |
| Housing Style | Take-Up Block |
| Inner Race Heat Treat Method | Zone-Hardened |
| Inner Ring OD (in) | 2.063 |
| Insert | 5208 |
| Length | 4.63 |
| Length Through Bore (in) | 1.938 |
| Lubricant | Lithium Complex NLGI 2 Grease |
| Max Operating Temperature (F) | 220 |
| Maximum Speed (RPM) | 4150 |
| Misalignment Capability | ±2.0° Misalignment - Static Only |
| Misalignment Type | Static Only |
| Outer Ring Land Profile | Standard |
| Overall Height (in) | 4.5 |
| Overall Length (in) | 5.69 |
| Overall Width (in) | 2.13 |
| Radial Clearance | Standard |
| Rolling element | Ball Bearing |
| Seal | Felt Labyrinth Seal |
| Series | ST |
| Setscrew Torque (in-lbs) | 125-165 |
| Shaft Locking Type | Set Screw |
| Size Code | 2-19 |
| Slot Spacing (in) | 4 |
| Slot Width (in) | 0.688 |
| Static Load Rating (lb) | 4467 |
| Vibration Frequency Fundamental Train | 0.007 |
| Vibration Frequency Inner Ring Defect | 0.091 |
| Vibration Frequency Outer Ring Defect | 0.059 |
| Vibration Frequency Roller Spin | 0.038 |
| Width | 2.31 |
710060
