TIMKEN 99437 Sleeves, Redi-Seal
- Write a review
$84.56
110.998 mm Width on Shaft0.813 in111.201 mm Shaft Size Minimum4.37 in120.65 mm Installation Depth1.65 in25.4 mm Shaft Size Maximum4.378 in41.91 mm Overall width1 inFlanged outside diameter4.75 inFlanged Outside Diameter4.75 in 120.65 mmInch/MetricInchInstallation Depth1.65 in 41.91 mmMaterialStainless steelOverall Width1 in 25.4 mmShaft Size Maximum4.378 in 111.201 mmShaft Size Minimum4.37 in 110.998 mmWidth on Shaft0.813 in 20.65 mm
Specifications
| 110.998 mm Width on Shaft | 0.813 in |
| 111.201 mm Shaft Size Minimum | 4.37 in |
| 120.65 mm Installation Depth | 1.65 in |
| 25.4 mm Shaft Size Maximum | 4.378 in |
| 41.91 mm Overall width | 1 in |
| Flanged outside diameter | 4.75 in |
| Flanged Outside Diameter | 4.75 in 120.65 mm |
| Inch/Metric | Inch |
| Installation Depth | 1.65 in 41.91 mm |
| Material | Stainless steel |
| Overall Width | 1 in 25.4 mm |
| Shaft Size Maximum | 4.378 in 111.201 mm |
| Shaft Size Minimum | 4.37 in 110.998 mm |
| Width on Shaft | 0.813 in 20.65 mm |
99437
