- New
TIMKEN 801906 Small Bore Inch Seal
- Write a review
$268.50
1.524 mm Overall width0.41 in10.414 mm Shaft Size Maximum7.68 in185.166 mm Width on Shaft0.24 in195.072 mm Shaft Size Minimum7.29 in6.604 mm Fitted Width0.31 in7.874 mm Fitted Width Tolerance0.06 inCross Section Height0.26 in 6.604 mmFitted Width0.31 in 7.874 mmFitted Width Tolerance0.06 in 1.524 mmInch/MetricInchMaterialFluoro-ElastomerOverall Width0.41 in 10.414 mmSeal TypeVRS3Shaft Size Maximum7.68 in 195.072 mmShaft Size Minimum7.29 in 185.166 mmWidth on Shaft0.24 in 6.096 mm
Specifications
| Anti rotation style | Flange, Optional Feet |
| Approximate brake facing life | 203 hphr |
| Approximate clutch facing life | 203 hphr |
| Bore details | Straight Bore/Shaft |
| Bore size | Machined Bore with Keyway |
| Bore style | Machined Bore with Keyway |
| Brake air chamber volume when new | 1.334 in³ |
| Brake air chamber volume when worn out | 2.044 in³ |
| Brake facing edge color code | Red |
| Brake facing effective area | 7.7 in² |
| Brake facing type | Standard coefficient |
| Brake peak thermal input rate | 7.00 hp |
| Brake response factor | 0.055 |
| Brake side engagement method | Air |
| Brake torque | 210 inlb |
| CE certified | CE |
| Clutch air chamber volume when new | 1.299 in³ |
| Clutch air chamber volume when worn out | 1.890 in³ |
| Clutch facing edge color code | Red |
| Clutch facing effective area | 7.66 in² |
| Clutch Facing Type | Standard coefficient |
| Clutch peak thermal input rate | 7.00 hp |
| Clutch response factor | 0.055 |
| Clutch side engagement method | Air |
| Combined continuous thermal dissipation | 0.14 hp |
| Combined heat sink capacity | 5350 ftlb |
| Drive inertia | 1.49 lbin² |
| Finish | Black Acrylic Paint |
| Inlet size | 0.125 NPT |
| Input bore diameter | 0.625 in |
| Input frame size | NEMA 56C |
| Materials of construction | Black Acrylic Paint |
| Max allowable pressure (psi) | 120 |
| Max ambient temperature (°F) | 150 |
| Max operating pressure (psi) | 80 |
| Max Speed | 1800 RPM |
| Max static brake torque | 210 inlb |
| Max static clutch torque | 190 inlb |
| Min ambient temperature (°F) | 32 |
| Mounting style | Foot, Motor or Reducer |
| Open or enclosed design | Enclosed |
| Output bore diameter | 0.625 in |
| Output frame size | NEMA 56C |
| Output shaft diameter | 0.625 in |
| Output shaft length | 2.06 in |
| Output shaft style | Shaft with Keyway |
| Overhung load capacity | 138 lbs, At 1800/92 lbs At 1200 RPM, 1.1 in From Pilot Face, For 10,000 Hrs Bearing Life |
| Product features | Air Engaged Brake, Air Engaged Clutch, Flange Mount, Foot Mount Capable, Enclosed Housing |
| RoHS compliant | RoHS |
| Shaft inertia | 1.18 lbin² |
801906
