TIMKEN 710261 Small Bore Inch Seal
- Write a review
$28.91
56.007 mm Outer Diameter2.213 in56.21 mm Overall width0.256 in6.502 mm Series710200 Shaft Size:0.626 inDisclaimerCAD Models / Sales Drawings are accurate envelope dimensions. Internal features such as lip position may vary from seal to seal and are only representative.Helix typeCounter-Clockwise-Spiral Lip Design Housing bore:2.205 inHelix TypeCounter-Clockwise-Spiral Lip DesignHousing Bore2.205 in 56.007 mmInch/MetricInchMaterialFluoro-ElastomerOuter Diameter2.213 in 56.21 mmOverall Width0.256 in 6.502 mmSeal Type32Series710200Shaft Size0.626 in 15.9 mm
Specifications
| Ability to Relubricate | Yes |
| Base Length (in) | 5.5 |
| Base to Center Height (in) | 1.438 |
| Base Width (in) | 1.5 |
| Bearing Insert Finish | Black Oxide |
| Bearing Insert Material | 52100 Bearing Steel |
| Bearing Type | Standard Duty |
| Bolt Size (in) | 3/8 |
| Bolt Spacing Max (in) | 4.38 |
| Bolt Spacing Min (in) | 3.88 |
| Bore Diameter (mm) | 25 |
| Bore Shape | Straight |
| Cage Material | PPS - Polyphenylene Sulfide |
| Cage Type | Land Riding Retainer |
| Centerline to Outermost Bearing Face (in) | 0.813 |
| Dynamic Load Rating (lb) | 2801 |
| End Cap | No |
| Fixed vs. Expansion | Fixed |
| Foot Height (in) | 0.5 |
| Grease Fitting Thread Size | 1/4-28 |
| Height | 5.75 |
| Housing | Pillow Block, Two Bolt |
| Housing Base | Solid |
| Housing Coating | Powder Coated |
| Housing Color | Black |
| Housing Construction | One Piece |
| Housing Material | Cast Iron |
| Housing Style | Pillow Block |
| Inner Race Heat Treat Method | Zone-Hardened |
| Inner Ring OD (in) | 1.375 |
| Insert | 5205C |
| Length | 3.5 |
| Length Through Bore (in) | 1.375 |
| Lubricant | Lithium Complex NLGI 2 Grease |
| Max Operating Temperature (F) | 220 |
| Maximum Speed (RPM) | 6350 |
| Misalignment Capability | ±2.0° Misalignment - Static Only |
| Misalignment Type | Static Only |
| Outer Ring Land Profile | Standard |
| Overall Height (in) | 2.81 |
| Overall Length (in) | 5.5 |
| Overall Width (in) | 1.5 |
| Radial Clearance | Standard |
| Rolling element | Ball Bearing |
| Seal | Single Lip Contact Seal |
| Shaft Locking Type | Set Screw |
| Size Code | 2-015 |
| Static Load Rating (lb) | 1651 |
| Vibration Frequency Fundamental Train | 0.007 |
| Vibration Frequency Inner Ring Defect | 0.099 |
| Vibration Frequency Outer Ring Defect | 0.068 |
| Vibration Frequency Roller Spin | 0.044 |
| Width | 1.69 |
710261
