Grundfos 96081297 CRI 1S-13 A-CA-I-V-HQQV 1HP 60HZ 56C Pump End Only
- Write a review
$2,337.56
ApprovalsCEBaseStainless steelBearingSICCode for rubberVCode for shaft sealHQQVConnect codeCACurve tolerance2012 3BDensity998.2 kg/m³Density (lb/ftBi)62.29Flange size56CFlange size for motor56CImpellerStainless steelImpellers13Liquid temperature range (°C)-20 - 90Low NPSHNMaterial codeAMax pressure (psi)363Max pressure at stated temp (°C)25 bar / 90Maximum head111.4 mMaximum operating pressure (bar)25ModelAMotor standardNEMANumber of reduced-diameter impellers0Pipe connection2 5/16 in / 1 in NPTPressure rating for connectionPN 25Product nameCRI 1S-13 A-CA-A-V-HQQVProduct no96081297Pump orientationVerticalPump speed on which pump data are based3484 RPMPump versionAPumped liquidWaterRate flow (gpm)4.4Rated flow1.1 m³/hRated head74.3 mSelected liquid temperature (°C)20Shaft seal arrangementSingleSize of inlet connectionDN 32Size of outlet connectionDN 32Stages13Temperature (°C)25 bar / -20Temperature range (F)-4 - 194Type of connectionFlexiClamp
Specifications
| Approvals | CE |
| Base | Stainless steel |
| Bearing | SIC |
| Code for rubber | V |
| Code for shaft seal | HQQV |
| Connect code | CA |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Density (lb/ftBi) | 62.29 |
| Flange size | 56C |
| Flange size for motor | 56C |
| Impeller | Stainless steel |
| Impellers | 13 |
| Liquid temperature range (°C) | -20 - 90 |
| Low NPSH | N |
| Material code | A |
| Max pressure (psi) | 363 |
| Max pressure at stated temp (°C) | 25 bar / 90 |
| Maximum head | 111.4 m |
| Maximum operating pressure (bar) | 25 |
| Model | A |
| Motor standard | NEMA |
| Number of reduced-diameter impellers | 0 |
| Pipe connection | 2 5/16 in / 1 in NPT |
| Pressure rating for connection | PN 25 |
| Product name | CRI 1S-13 A-CA-A-V-HQQV |
| Product no | 96081297 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3484 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rate flow (gpm) | 4.4 |
| Rated flow | 1.1 m³/h |
| Rated head | 74.3 m |
| Selected liquid temperature (°C) | 20 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 32 |
| Size of outlet connection | DN 32 |
| Stages | 13 |
| Temperature (°C) | 25 bar / -20 |
| Temperature range (F) | -4 - 194 |
| Type of connection | FlexiClamp |
96081297