Grundfos 98074621 P-fgj-a-e-hqqqe 2hp 1x115/230/60
- Write a review
$2,387.13
ApprovalsCURUSApprovals for drinking waterNSF/ANSI 61BaseCast ironCode for rubberECode for shaft sealHQQEConnect codeFGJCurve tolerance2012 3BDensity998.2 kg/m³Flange rating inlet250 lbFlange size for motor56CImpellerStainless steelImpellers7Liquid temperature range (°C)-20 - 120Low NPSHNMaterial codeAMax pressure at stated temp (°C)25 bar / 120Maximum head73.7 mMaximum operating pressure (bar)25ModelAMotor standardNEMANumber of reduced-diameter impellers0Power (P2) required by pump1.5 kWPressure rating for connectionPN 25Pressure sensorNProduct nameCR 5-7 P-FGJ-A-E-HQQEProduct no98074621Pump orientationVerticalPump speed on which pump data are based3499 RPMPump versionPPumped liquidWaterRated flow6.9 m³/hRated head53.8 mSelected liquid temperature (°C)20Shaft seal arrangementSingleSize of inlet connectionDN 25/32Size of outlet connectionDN 25/32Stages7Temperature (°C)25 bar / -20Type of connectionDIN / ANSI / JIS
Specifications
| Approvals | CURUS |
| Approvals for drinking water | NSF/ANSI 61 |
| Base | Cast iron |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | FGJ |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Flange rating inlet | 250 lb |
| Flange size for motor | 56C |
| Impeller | Stainless steel |
| Impellers | 7 |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Material code | A |
| Max pressure at stated temp (°C) | 25 bar / 120 |
| Maximum head | 73.7 m |
| Maximum operating pressure (bar) | 25 |
| Model | A |
| Motor standard | NEMA |
| Number of reduced-diameter impellers | 0 |
| Power (P2) required by pump | 1.5 kW |
| Pressure rating for connection | PN 25 |
| Pressure sensor | N |
| Product name | CR 5-7 P-FGJ-A-E-HQQE |
| Product no | 98074621 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3499 RPM |
| Pump version | P |
| Pumped liquid | Water |
| Rated flow | 6.9 m³/h |
| Rated head | 53.8 m |
| Selected liquid temperature (°C) | 20 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 25/32 |
| Size of outlet connection | DN 25/32 |
| Stages | 7 |
| Temperature (°C) | 25 bar / -20 |
| Type of connection | DIN / ANSI / JIS |
98074621
