Grundfos 96084832 CRN 5-8 A-P-G-E-HQQE 1PH 3HP TEFC 60HZ
- Write a review
$2,850.61
Actual impeller diameter73.2 mmApprovalsCURUSApprovals for drinking waterNSF61BaseStainless steelBearingSICCode for rubberECode for shaft sealHQQEConnect codePCoolingTEFCCurve tolerance2012 3BDensity998.2 kg/m³Density (lb/ftBi)62.29DOE pump energy index CL0.89Enclosure class (IEC 34-5)IP55Flange size182TCFlange size for motor182TCFull load SF current31,8/18-16,9 AHP3IE efficiency75%ImpellerStainless steelImpellers8Insulation class (IEC 85)FLiquid temperature range (°C)-20 - 120Low NPSHNMains frequency60 HzMaterial codeAMax ambient temperature (F)104Max pressure (psi)363Max pressure at stated temp (°C)25 bar / 120Maximum ambient temperature (°C)40Maximum head83 mMaximum operating pressure (bar)25ModelAMotor efficiency at full load75 %Motor no84Z04014Motor standardNEMAMotor typeBALDORNumber of poles2Number of reduced-diameter impellers0Pipe connection1 11/16 inPower (P2) required by pump2.2 kWPressure rating for connectionPN 50Product nameCRN 5-8 A-P-A-E-HQQEProduct no96084832Pump orientationVerticalPump speed on which pump data are based3457 RPMPump versionAPumped liquidWaterRate flow (gpm)30.4Rated current29/16-14,5 ARated flow6.9 m³/hRated head59.6 mRated power - P22.2 kWRated speed3450 rpmRated voltage1 x 115/208-230 VSelected liquid temperature (°C)20Service factor1.15Shaft seal arrangementSingleSize of inlet connectionDN 32Size of outlet connectionDN 32Stages8Temperature (°C)25 bar / -20Temperature range (F)-4 - 248Type of connectionPJE
Specifications
| Actual impeller diameter | 73.2 mm |
| Approvals | CURUS |
| Approvals for drinking water | NSF61 |
| Base | Stainless steel |
| Bearing | SIC |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | P |
| Cooling | TEFC |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Density (lb/ftBi) | 62.29 |
| DOE pump energy index CL | 0.89 |
| Enclosure class (IEC 34-5) | IP55 |
| Flange size | 182TC |
| Flange size for motor | 182TC |
| Full load SF current | 31,8/18-16,9 A |
| HP | 3 |
| IE efficiency | 75% |
| Impeller | Stainless steel |
| Impellers | 8 |
| Insulation class (IEC 85) | F |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Mains frequency | 60 Hz |
| Material code | A |
| Max ambient temperature (F) | 104 |
| Max pressure (psi) | 363 |
| Max pressure at stated temp (°C) | 25 bar / 120 |
| Maximum ambient temperature (°C) | 40 |
| Maximum head | 83 m |
| Maximum operating pressure (bar) | 25 |
| Model | A |
| Motor efficiency at full load | 75 % |
| Motor no | 84Z04014 |
| Motor standard | NEMA |
| Motor type | BALDOR |
| Number of poles | 2 |
| Number of reduced-diameter impellers | 0 |
| Pipe connection | 1 11/16 in |
| Power (P2) required by pump | 2.2 kW |
| Pressure rating for connection | PN 50 |
| Product name | CRN 5-8 A-P-A-E-HQQE |
| Product no | 96084832 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3457 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rate flow (gpm) | 30.4 |
| Rated current | 29/16-14,5 A |
| Rated flow | 6.9 m³/h |
| Rated head | 59.6 m |
| Rated power - P2 | 2.2 kW |
| Rated speed | 3450 rpm |
| Rated voltage | 1 x 115/208-230 V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.15 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 32 |
| Size of outlet connection | DN 32 |
| Stages | 8 |
| Temperature (°C) | 25 bar / -20 |
| Temperature range (F) | -4 - 248 |
| Type of connection | PJE |
96084832
