Grundfos 98161268 CRN5-9 A-FGJ-A-E-HQQE 3X230/400 50HZ
- Write a review
$6,605.56
ApprovalsEAC,UKCA,CURUS,SEPROApprovals for drinking waterWRAS,ACSBaseStainless steelCode for rubberECode for shaft sealHQQEConnect codeFGJCurve tolerance2012 3BDensity998.2 kg/m³Flange rating inlet300 lbFlange size for motorFT115ImpellerStainless steelImpellers9Liquid temperature range (°C)-20 - 120Low NPSHNMaterial codeAMax pressure at stated temp (°C)25 bar / 120Maximum head63.9 mMaximum operating pressure (bar)25Minimum efficiency index, MEI ≥0.57ModelAMotor standardIECNumber of reduced-diameter impellers0Power (P2) required by pump1.5 kWPressure rating for connectionPN 25Pressure sensorNProduct nameCRN 5-9 A-FGJ-A-E-HQQEProduct no98161268Pump orientationVerticalPump speed on which pump data are based2896 rpmPump versionAPumped liquidWaterRated flow5.8 m³/hRated head47.7 mSelected liquid temperature (°C)20Shaft seal arrangementSingleSize of inlet connectionDN 25/32Size of outlet connectionDN 25/32Stages9Temperature (°C)25 bar / -20Type of connectionDIN / ANSI / JIS
Specifications
| Approvals | EAC,UKCA,CURUS,SEPRO |
| Approvals for drinking water | WRAS,ACS |
| Base | Stainless steel |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | FGJ |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Flange rating inlet | 300 lb |
| Flange size for motor | FT115 |
| Impeller | Stainless steel |
| Impellers | 9 |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Material code | A |
| Max pressure at stated temp (°C) | 25 bar / 120 |
| Maximum head | 63.9 m |
| Maximum operating pressure (bar) | 25 |
| Minimum efficiency index, MEI ≥ | 0.57 |
| Model | A |
| Motor standard | IEC |
| Number of reduced-diameter impellers | 0 |
| Power (P2) required by pump | 1.5 kW |
| Pressure rating for connection | PN 25 |
| Pressure sensor | N |
| Product name | CRN 5-9 A-FGJ-A-E-HQQE |
| Product no | 98161268 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 2896 rpm |
| Pump version | A |
| Pumped liquid | Water |
| Rated flow | 5.8 m³/h |
| Rated head | 47.7 m |
| Selected liquid temperature (°C) | 20 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 25/32 |
| Size of outlet connection | DN 25/32 |
| Stages | 9 |
| Temperature (°C) | 25 bar / -20 |
| Type of connection | DIN / ANSI / JIS |
98161268