Grundfos 10014518 230V SINGLE PHASE 2 HP 4" SUBMERSIBLE WELL
- Write a review
$2,253.56
Applic motorGrundfosApprovalsCE,GOST2,CSAAxial load max680 kgBuilt-in temp transmitterNoCos phi - power factor0.86Curve tolerance2012 3BDensity998.2 kg/m³Enclosure class (IEC 34-5)IP58ErP statusEuP Standalone/Prod.ImpellerStainless steelInsulation class (IEC 85)FMains frequency60 HzMaximum ambient pressure (bar)60Maximum liquid temperature (°C)60ModelAMotorStainless steelMotor diameter4 inMotor no79454506Motor typeMS4000Motor type 1-phaseCSCRPower (P2) required by pump1.5 kWProduct name16S20-18Product no10014518PumpStainless steelPump no10010018Pump outlet1 1/4 in NPTPump speed on which pump data are based3450 rpmPumped liquidWaterRated current13.2 ARated flow4 m³/hRated head112 mRated power - P21.5 kWRated speed3450 rpmRated voltage1 x 230 VSales regionNamregSelected liquid temperature (°C)20Service factor1.25Shaft seal for motorHM/CERSpecification for shaft endSPLINEStages18Start methoddirect-on-lineStarting current420 %Thermal protecexternalValveYES
Specifications
| Applic motor | Grundfos |
| Approvals | CE,GOST2,CSA |
| Axial load max | 680 kg |
| Built-in temp transmitter | No |
| Cos phi - power factor | 0.86 |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Enclosure class (IEC 34-5) | IP58 |
| ErP status | EuP Standalone/Prod. |
| Impeller | Stainless steel |
| Insulation class (IEC 85) | F |
| Mains frequency | 60 Hz |
| Maximum ambient pressure (bar) | 60 |
| Maximum liquid temperature (°C) | 60 |
| Model | A |
| Motor | Stainless steel |
| Motor diameter | 4 in |
| Motor no | 79454506 |
| Motor type | MS4000 |
| Motor type 1-phase | CSCR |
| Power (P2) required by pump | 1.5 kW |
| Product name | 16S20-18 |
| Product no | 10014518 |
| Pump | Stainless steel |
| Pump no | 10010018 |
| Pump outlet | 1 1/4 in NPT |
| Pump speed on which pump data are based | 3450 rpm |
| Pumped liquid | Water |
| Rated current | 13.2 A |
| Rated flow | 4 m³/h |
| Rated head | 112 m |
| Rated power - P2 | 1.5 kW |
| Rated speed | 3450 rpm |
| Rated voltage | 1 x 230 V |
| Sales region | Namreg |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.25 |
| Shaft seal for motor | HM/CER |
| Specification for shaft end | SPLINE |
| Stages | 18 |
| Start method | direct-on-line |
| Starting current | 420 % |
| Thermal protec | external |
| Valve | YES |
10014518
