Grundfos 96081131 CR 1S-10 A-FGJ-A-V-HQQV 1PH 0.75HP TEFC 6
- Write a review
$1,850.06
ApprovalsCURUSBaseCast ironBearingSICCode for rubberVCode for shaft sealHQQVConnect codeFGJCoolingTEFCCurve tolerance2012 3BDensity998.2 kg/m³Density (lb/ftBi)62.29Enclosure class (IEC 34-5)IP54Flange rating inlet250 lbFlange size56CFlange size for motor56CFull load SF current11.4/6.0 - 5.7 AHP0.75ImpellerStainless steelImpellers10Insulation class (IEC 85)BLiquid temperature range (°C)-20 - 90Low NPSHNMains frequency60 HzMaterial codeAMax ambient temperature (F)104Max pressure (psi)363Max pressure at stated temp (°C)25 bar / 90Maximum ambient temperature (°C)40Maximum head84.6 mMaximum operating pressure (bar)25ModelAMotor efficiency at full load66.0 %Motor no84Z04001Motor standardNEMAMotor typeBALDORNumber of poles2Number of reduced-diameter impellers0Pipe connection1 1/4 inPower (P2) required by pump0.55 kWPressure rating for connectionPN 25Product nameCR 1S-10 A-FGJ-A-V-HQQVProduct no96081131Pump orientationVerticalPump speed on which pump data are based3464 RPMPump versionAPumped liquidWaterRate flow (gpm)4.4Rated current9,60/5,00-4,80 ARated flow1.1 m³/hRated head56.3 mRated power - P20.55 kWRated speed3450 rpmRated voltage1 x 115/208-230 VSelected liquid temperature (°C)20Service factor1.25Shaft seal arrangementSingleSize of inlet connectionDN 25/32Size of outlet connectionDN 25/32Stages10Temperature (°C)25 bar / -20Temperature range (F)-4 - 194Type of connectionDIN / ANSI / JIS
Specifications
| Approvals | CURUS |
| Base | Cast iron |
| Bearing | SIC |
| Code for rubber | V |
| Code for shaft seal | HQQV |
| Connect code | FGJ |
| Cooling | TEFC |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Density (lb/ftBi) | 62.29 |
| Enclosure class (IEC 34-5) | IP54 |
| Flange rating inlet | 250 lb |
| Flange size | 56C |
| Flange size for motor | 56C |
| Full load SF current | 11.4/6.0 - 5.7 A |
| HP | 0.75 |
| Impeller | Stainless steel |
| Impellers | 10 |
| Insulation class (IEC 85) | B |
| Liquid temperature range (°C) | -20 - 90 |
| Low NPSH | N |
| Mains frequency | 60 Hz |
| Material code | A |
| Max ambient temperature (F) | 104 |
| Max pressure (psi) | 363 |
| Max pressure at stated temp (°C) | 25 bar / 90 |
| Maximum ambient temperature (°C) | 40 |
| Maximum head | 84.6 m |
| Maximum operating pressure (bar) | 25 |
| Model | A |
| Motor efficiency at full load | 66.0 % |
| Motor no | 84Z04001 |
| Motor standard | NEMA |
| Motor type | BALDOR |
| Number of poles | 2 |
| Number of reduced-diameter impellers | 0 |
| Pipe connection | 1 1/4 in |
| Power (P2) required by pump | 0.55 kW |
| Pressure rating for connection | PN 25 |
| Product name | CR 1S-10 A-FGJ-A-V-HQQV |
| Product no | 96081131 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3464 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rate flow (gpm) | 4.4 |
| Rated current | 9,60/5,00-4,80 A |
| Rated flow | 1.1 m³/h |
| Rated head | 56.3 m |
| Rated power - P2 | 0.55 kW |
| Rated speed | 3450 rpm |
| Rated voltage | 1 x 115/208-230 V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.25 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 25/32 |
| Size of outlet connection | DN 25/32 |
| Stages | 10 |
| Temperature (°C) | 25 bar / -20 |
| Temperature range (F) | -4 - 194 |
| Type of connection | DIN / ANSI / JIS |
96081131