Grundfos 99918449 GRUCRN95-1-1 A-G-A-E-HQQE 220DD/460D 60 HZ 15HP 3 x 208-230/460 V Centrifugal Pump
- Write a review
$9,692.94
Actual impeller diameter154.1 mmApprovals for drinking waterNSF/ANSI 61,NSF/ANSI 372BaseStainless steelBearingWC/WCCode for rubberECode for shaft sealHQQEConnect codeGCoolingIC 411Cos phi - power factor0.87Curve tolerance2012 3BDensity998.2 kg/m³DOE pump energy index CL0.93Enclosure class (IEC 34-5)IP55Flange size for motor254TCFull load SF current40/20 AIE efficiencyIE3 91%IE Efficiency classIE3 / NEMA PremiumImpellerStainless steelImpellers1Insulation class (IEC 85)FLiquid temperature range (°C)-20 - 120Low NPSHNMains frequency60 HzMaterial certified according toEuropean standardsMaterial codeAMax pressure at stated temp (°C)16 bar / 120Maximum ambient temperature (°C)40Maximum head36.3 mMaximum operating pressure (bar)16ModelAMotor efficiency at 1/2 load89.5 %Motor efficiency at 3/4 load91 %Motor efficiency at full load91 %Motor no99883247Motor standardNEMAMotor typeWEGNumber of poles2Number of reduced-diameter impellers1Power (P2) required by pump11 kWPressure rating for connection150 lbProduct nameCRN 95-1-1 A-G-A-E-HQQEProduct no99918449Pump orientationVerticalPump speed on which pump data are based3538 RPMPump versionAPumped liquidWaterRated current34.8/17.4 ARated flow113.6 m³/hRated head23.4 mRated power - P211 kWRated speed3525 RPMRated voltage3 x 230/460 VSelected liquid temperature (°C)20Service factor1.15Shaft seal arrangementSingleSize of inlet connection4 inSize of outlet connection4 inStages1Starting current680 %Support bearingGraflonThrust handling deviceNType of connectionANSI
Specifications
| Actual impeller diameter | 154.1 mm |
| Approvals for drinking water | NSF/ANSI 61,NSF/ANSI 372 |
| Base | Stainless steel |
| Bearing | WC/WC |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | G |
| Cooling | IC 411 |
| Cos phi - power factor | 0.87 |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| DOE pump energy index CL | 0.93 |
| Enclosure class (IEC 34-5) | IP55 |
| Flange size for motor | 254TC |
| Full load SF current | 40/20 A |
| IE efficiency | IE3 91% |
| IE Efficiency class | IE3 / NEMA Premium |
| Impeller | Stainless steel |
| Impellers | 1 |
| Insulation class (IEC 85) | F |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Mains frequency | 60 Hz |
| Material certified according to | European standards |
| Material code | A |
| Max pressure at stated temp (°C) | 16 bar / 120 |
| Maximum ambient temperature (°C) | 40 |
| Maximum head | 36.3 m |
| Maximum operating pressure (bar) | 16 |
| Model | A |
| Motor efficiency at 1/2 load | 89.5 % |
| Motor efficiency at 3/4 load | 91 % |
| Motor efficiency at full load | 91 % |
| Motor no | 99883247 |
| Motor standard | NEMA |
| Motor type | WEG |
| Number of poles | 2 |
| Number of reduced-diameter impellers | 1 |
| Power (P2) required by pump | 11 kW |
| Pressure rating for connection | 150 lb |
| Product name | CRN 95-1-1 A-G-A-E-HQQE |
| Product no | 99918449 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3538 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rated current | 34.8/17.4 A |
| Rated flow | 113.6 m³/h |
| Rated head | 23.4 m |
| Rated power - P2 | 11 kW |
| Rated speed | 3525 RPM |
| Rated voltage | 3 x 230/460 V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.15 |
| Shaft seal arrangement | Single |
| Size of inlet connection | 4 in |
| Size of outlet connection | 4 in |
| Stages | 1 |
| Starting current | 680 % |
| Support bearing | Graflon |
| Thrust handling device | N |
| Type of connection | ANSI |
99918449