GPI 523000-01 PRO20-230-PO AC ELECTRIC FUEL TRANSFER VANE PUMPS GPRO

Owners ManualPRO20-230 OVERVIEWThe GPRO PRO20-230 heavy-duty fuel transfer pump is the pump of choice for agricultural and construction applications with low viscosity petroleum fuels. The PRO20-230 transfer pump is designed for use with diesel, gasoline, and kerosene and uses a long-lasting carbon rotary vane design that is field replaceable. The 230V AC motor delivers flow rates up to 20 GPM (76 L/min).BENEFITS INCLUDE:SPECIFICATIONSThe PRO20-115 and PRO20-230 fuel pumps are de signed to safely transfer low viscosity petroleum fuels such as gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene. The pumps are designed for permanent mounting on vented storage tanks, either in-ground or above-ground. RAINPROOF for outdoor use. Use of alcohol blends above 10% (E10) and biodiesel blends above 5% (B5) have not been reviewed by UL.PerformancePump Rate: PRO20-115: Up to 20 GPM (76 LPM)PRO20-230: Up to 20 GPM (76 LPM) @ 60 HzUp to 17 GPM (64 LPM) @ 50 HzDuty Cycle: 30 minutes ON, 30 minutes OFFDry Prime: 15 ft. (4.6 m) maximumDischarge Lift: 10 ft. (3 m) maximumOperating Temperature -20° F to +125° F (-29° C to +52° C)XTS Operating TemperatureExtreme Temperature Series pumps are capable of operation down to -40° F. Any pump operation below -20° F has not been evaluated by UL.Bypass Pressure 22 PSIElectrical Input: PRO20-115: 115 VAC, 60 HzPRO20-230: 220-240 VAC, 50-60 HzConduit: ½ inch FNPTCurrent Draw: PRO20-115: 4.9 amps at full loadPRO20-230: 2.3 amps on 60 Hz 2.5 amps on 50 Hz at full load on 230 VACMotor: PRO20-115: 1/3 HP, 1725 RPMPRO20-230: 1/3 HP, 1725 RPM on 60 Hz or .19 kw, 1425 RPM on 50 HzBoth motors are induction type with an internal temperature-limiting device.Mechanical ConnectionsBung: 2 inch NPTInlet: 1 inch NPTOutlet: 1 inch NPTAccessoriesHose: 1 in. NPT x 1 in. x 18 ft. (5.5 m)Buna-N electrically conductiveNozzle: 1 in. NPT manual diesel or 1 in. NPT automatic dieselSecurity: Nozzle can be pa