GRUNDFOS 91530345 GRU10S30-34 3X230V G400 91530345
- Write a review
$0.00
Applic motorGrundfosApprovalsCE,GOST2,CSAAxial load max450 kgBuilt-in temp transmitterNoCos phi - power factor0.85-0.75Curve tolerance2012 3BDensity998.2 kg/m³Enclosure class (IEC 34-5)IP58ErP statusEuP Standalone/Prod.ImpellerStainless steelInsulation class (IEC 85)FMains frequency60 HzMaximum ambient pressure (bar)60Maximum liquid temperature (°C)60ModelAMotorStainless steelMotor diameter4 inMotor no79304507Motor typeMS4000Power (P2) required by pump2.2 kWProduct name10S30-34Product no91530345PumpStainless steelPump no09110034Pump outlet1 1/4 in NPTPump speed on which pump data are based3450 rpmPumped liquidWaterRated current11.9-11.6 ARated flow2 m³/hRated head199 mRated power - P22.2 kWRated speed3415-3460 RPMRated voltage3 x 208-230 VSales regionNamregSelected liquid temperature (°C)20Service factor1.15Shaft seal for motorHM/CERSpecification for shaft endCYLINDRICALStages34Start methoddirect-on-lineStarting current480-520 %Thermal protecexternalValveYES
Specifications
| Applic motor | Grundfos |
| Approvals | CE,GOST2,CSA |
| Axial load max | 450 kg |
| Built-in temp transmitter | No |
| Cos phi - power factor | 0.85-0.75 |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Enclosure class (IEC 34-5) | IP58 |
| ErP status | EuP Standalone/Prod. |
| Impeller | Stainless steel |
| Insulation class (IEC 85) | F |
| Mains frequency | 60 Hz |
| Maximum ambient pressure (bar) | 60 |
| Maximum liquid temperature (°C) | 60 |
| Model | A |
| Motor | Stainless steel |
| Motor diameter | 4 in |
| Motor no | 79304507 |
| Motor type | MS4000 |
| Power (P2) required by pump | 2.2 kW |
| Product name | 10S30-34 |
| Product no | 91530345 |
| Pump | Stainless steel |
| Pump no | 09110034 |
| Pump outlet | 1 1/4 in NPT |
| Pump speed on which pump data are based | 3450 rpm |
| Pumped liquid | Water |
| Rated current | 11.9-11.6 A |
| Rated flow | 2 m³/h |
| Rated head | 199 m |
| Rated power - P2 | 2.2 kW |
| Rated speed | 3415-3460 RPM |
| Rated voltage | 3 x 208-230 V |
| Sales region | Namreg |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.15 |
| Shaft seal for motor | HM/CER |
| Specification for shaft end | CYLINDRICAL |
| Stages | 34 |
| Start method | direct-on-line |
| Starting current | 480-520 % |
| Thermal protec | external |
| Valve | YES |
91530345