Cart
Custom content
<p>This is custom content</p>

GPI 504000-04 PRO35-115RD 35GPM PUMP AC ELECTRIC FUEL TRANSFER VANE PUMPS GPRO

$2,200.00
Quantity
Add to wishlist
Usually in stock

  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

Guarantee safe & secure checkout

PRO35 COMBO SERIES OVERVIEWThe GPRO PRO35-115/QM is the perfect pump and meter combination that delivers flow rates up to 35 GPM (132 L/min) and provides precision fuel measurements for more accurate readings. The PRO35-115 professional-grade fuel transfer pump is the pump of choice for your large stationary fuel tanks for your applications with low viscosity petroleum fuels such as gasoline, diesel fuel, and kerosene. Available in a variety of configurations to meet your application's needs.BENEFITS INCLUDE:N/AHigh Pressure PumpHigh Flow RateExtended duty cycle exceeds industry standardsThermally protected motorField replaceable switch and vanesVacuum breaker readyCenter base inlet with check valvehttps://drive.google.com/file/d/101NW1TURsXbgYkCFZ7zKJzMoR7Z72HhR/view?usp=sharingSPECIFICATIONSThe PRO35 series fuel pump is designed to safely trans fer low viscosity petroleum fuels such as gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene. The pump is designed for permanent mounting on vented storage tanks, either in-ground or above-ground. RAINPROOF for outdoor use. Use of alcohol blends above 10% (E10) and biodiesel blends above 5% (B5) have not been reviewed by UL.PerformancePump Rate: Up to 35 GPM (132 LPM)Duty Cycle: 30 minutes ON, 30 minutes OFFDry Prime: 15 ft. (4.6 m) maximumDischarge Lift: 10 ft. (3 m) maximumOperating Temperature -20° F to +125° F (-29° C to +52° C)XTS Operating Temperature Extreme Temperature Series pumps are capable of operation down to -40° F. Any pump operation below -20° F has not been evaluated by UL.Bypass Pressure 25 PSIElectrical Input: Factory set at 115 VAC, 60 Hz. Optional to set at 230 VAC, 60 Hz.Conduit: ½ in. FNPTCurrent Draw: 9.8 amps at full load (at 115 VAC, 60 Hz)Motor: ¾ HP, 1725 RPM induction type provided with an internal auxiliary temperature-limiting deviceMechanical ConnectionsBung: 2 in. MNPTInlet: 1 ¼ in. FNPTOutlet: 1 in. FNPTAccessoriesHose: 1 in. N

504000-04
This website uses cookies to ensure you get the best experience on our website