Grundfos 96121958 CR32-5-2 A-F-A-E-HQQE 3x230/400 50HZ
- Write a review
$7,490.89
ApprovalsCE,EAC,UKCA,SEPROApprovals for drinking waterWRAS,ACSBaseCast ironBearingSICBuilt-in motor protectionPTCCode for rubberECode for shaft sealHQQEConnect codeFCos phi - power factor0.88-0.84Curve tolerance2012 3BDensity998.2 kg/m³Enclosure class (IEC 34-5)55 Dust/JettingFlange size for motorFF300IE Efficiency classIE3ImpellerStainless steelImpellers5Insulation class (IEC 85)FLiquid temperature range (°C)-30 - 120Low NPSHNMains frequency50 HzMaterial codeAMax pressure at stated temp (°C)16 bar / 120Maximum ambient temperature (°C)60Maximum head90.2 mMaximum operating pressure (bar)16Minimum efficiency index, MEI ≥0.70ModelBMotor efficiency at 1/2 load91.3-91.2 %Motor efficiency at 3/4 load91.8-91.8 %Motor efficiency at full load91.2-91.2 %Motor no85U07524Motor standardIECMotor type160MBNumber of poles2Number of reduced-diameter impellers2Power (P2) required by pump11 kWPressure rating for connectionPN 40Product nameCR 32-5-2 A-F-A-E-HQQEProduct no96121958Pump orientationVerticalPump speed on which pump data are based2924 RPMPump versionAPumped liquidWaterRated current36,0-34,5/20,8-19,8 ARated flow30 m³/hRated head69.7 mRated power - P211 kWRated speed2940-2950 RPMRated voltage3 x 220-240D/380-415Y VSelected liquid temperature (°C)20Shaft seal arrangementSingleSize of inlet connectionDN 65Size of outlet connectionDN 65Stages5Starting current660-780 %Support bearingGraflonTemperature (°C)16 bar / -30Terminal box position6Type of connectionDIN
Specifications
| Approvals | CE,EAC,UKCA,SEPRO |
| Approvals for drinking water | WRAS,ACS |
| Base | Cast iron |
| Bearing | SIC |
| Built-in motor protection | PTC |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | F |
| Cos phi - power factor | 0.88-0.84 |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Enclosure class (IEC 34-5) | 55 Dust/Jetting |
| Flange size for motor | FF300 |
| IE Efficiency class | IE3 |
| Impeller | Stainless steel |
| Impellers | 5 |
| Insulation class (IEC 85) | F |
| Liquid temperature range (°C) | -30 - 120 |
| Low NPSH | N |
| Mains frequency | 50 Hz |
| Material code | A |
| Max pressure at stated temp (°C) | 16 bar / 120 |
| Maximum ambient temperature (°C) | 60 |
| Maximum head | 90.2 m |
| Maximum operating pressure (bar) | 16 |
| Minimum efficiency index, MEI ≥ | 0.70 |
| Model | B |
| Motor efficiency at 1/2 load | 91.3-91.2 % |
| Motor efficiency at 3/4 load | 91.8-91.8 % |
| Motor efficiency at full load | 91.2-91.2 % |
| Motor no | 85U07524 |
| Motor standard | IEC |
| Motor type | 160MB |
| Number of poles | 2 |
| Number of reduced-diameter impellers | 2 |
| Power (P2) required by pump | 11 kW |
| Pressure rating for connection | PN 40 |
| Product name | CR 32-5-2 A-F-A-E-HQQE |
| Product no | 96121958 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 2924 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rated current | 36,0-34,5/20,8-19,8 A |
| Rated flow | 30 m³/h |
| Rated head | 69.7 m |
| Rated power - P2 | 11 kW |
| Rated speed | 2940-2950 RPM |
| Rated voltage | 3 x 220-240D/380-415Y V |
| Selected liquid temperature (°C) | 20 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 65 |
| Size of outlet connection | DN 65 |
| Stages | 5 |
| Starting current | 660-780 % |
| Support bearing | Graflon |
| Temperature (°C) | 16 bar / -30 |
| Terminal box position | 6 |
| Type of connection | DIN |
96121958