Grundfos 99145049 CR95-4-1 A-G-A-E-HQQE 230D/460Y 60 HZ
- Write a review
$15,964.72
Actual impeller diameter154.1 mmApprovals for drinking waterNSF/ANSI 61, NSF/ANSI 372BaseDuctile cast ironBearingWC/WCCode for rubberECode for shaft sealHQQEConnect codeGCoolingTEFCCos phi - power factor0.87Curve tolerance2012 3BDensity998.2 kg/m³DOE pump energy index CL0.93Enclosure class (IEC 34-5)IP54Flange size for motor364TSCFull load SF current150/75 AIE efficiencyIE3 93,6%IE Efficiency classIE3 / NEMA PremiumImpellerStainless steelImpellers4Insulation class (IEC 85)FLiquid temperature range (°C)-20 - 120Low NPSHNMains frequency60 HzMaterial certified according toEuropean standardsMaterial codeAMax pressure at stated temp (°C)16 bar / 120Maximum ambient temperature (°C)50Maximum head168 mMaximum operating pressure (bar)16ModelAMotor efficiency at full load93.6 %Motor no84Z03818Motor standardNEMAMotor typeBALDORNumber of poles2Number of reduced-diameter impellers1Power (P2) required by pump45 kWPressure rating for connection150 lbProduct nameCR 95-4-1 A-G-A-E-HQQEProduct no99145049Pump orientationVerticalPump speed on which pump data are based3547 rpmPump versionAPumped liquidWaterRated current132/66 ARated flow113.6 m³/hRated head123.6 mRated power - P245 kWRated speed3550 RPMRated voltage3 x 230/460 VSelected liquid temperature (°C)20Service factor1.15Shaft seal arrangementSingleSize of inlet connection4 inSize of outlet connection4 inStages4Support bearingGraflonThrust handling deviceNType of connectionANSI
Specifications
| Actual impeller diameter | 154.1 mm |
| Approvals for drinking water | NSF/ANSI 61, NSF/ANSI 372 |
| Base | Ductile cast iron |
| Bearing | WC/WC |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | G |
| Cooling | TEFC |
| Cos phi - power factor | 0.87 |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| DOE pump energy index CL | 0.93 |
| Enclosure class (IEC 34-5) | IP54 |
| Flange size for motor | 364TSC |
| Full load SF current | 150/75 A |
| IE efficiency | IE3 93,6% |
| IE Efficiency class | IE3 / NEMA Premium |
| Impeller | Stainless steel |
| Impellers | 4 |
| Insulation class (IEC 85) | F |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Mains frequency | 60 Hz |
| Material certified according to | European standards |
| Material code | A |
| Max pressure at stated temp (°C) | 16 bar / 120 |
| Maximum ambient temperature (°C) | 50 |
| Maximum head | 168 m |
| Maximum operating pressure (bar) | 16 |
| Model | A |
| Motor efficiency at full load | 93.6 % |
| Motor no | 84Z03818 |
| Motor standard | NEMA |
| Motor type | BALDOR |
| Number of poles | 2 |
| Number of reduced-diameter impellers | 1 |
| Power (P2) required by pump | 45 kW |
| Pressure rating for connection | 150 lb |
| Product name | CR 95-4-1 A-G-A-E-HQQE |
| Product no | 99145049 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3547 rpm |
| Pump version | A |
| Pumped liquid | Water |
| Rated current | 132/66 A |
| Rated flow | 113.6 m³/h |
| Rated head | 123.6 m |
| Rated power - P2 | 45 kW |
| Rated speed | 3550 RPM |
| Rated voltage | 3 x 230/460 V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.15 |
| Shaft seal arrangement | Single |
| Size of inlet connection | 4 in |
| Size of outlet connection | 4 in |
| Stages | 4 |
| Support bearing | Graflon |
| Thrust handling device | N |
| Type of connection | ANSI |
99145049
