Grundfos 96083383 CRI 3-4 A-CA-I-E-HQQE 1PH 0.75HP TEFC 60H
- Write a review
$1,539.69
ApprovalsCURUSApprovals for drinking waterNSF61BaseStainless steelBearingSICCode for rubberECode for shaft sealHQQEConnect codeCACoolingTEFCCurve tolerance2012 3BDensity998.2 kg/m³Density (lb/ftBi)62.29Enclosure class (IEC 34-5)IP54Flange size56CFlange size for motor56CFull load SF current11.4/6.0 - 5.7 AHP0.75ImpellerStainless steelImpellers4Insulation class (IEC 85)BLiquid temperature range (°C)-20 - 120Low NPSHNMains frequency60 HzMaterial codeAMax ambient temperature (F)104Max pressure (psi)363Max pressure at stated temp (°C)25 bar / 120Maximum ambient temperature (°C)40Maximum head37.9 mMaximum operating pressure (bar)25ModelAMotor efficiency at full load66.0 %Motor no84Z04001Motor standardNEMAMotor typeBALDORNumber of poles2Number of reduced-diameter impellers0Pipe connection2 5/16 in / 1 in NPTPower (P2) required by pump0.55 kWPressure rating for connectionPN 25Product nameCRI 3-4 A-CA-A-E-HQQEProduct no96083383Pump orientationVerticalPump speed on which pump data are based3464 RPMPump versionAPumped liquidWaterRate flow (gpm)15.4Rated current9,60/5,00-4,80 ARated flow3.5 m³/hRated head27.6 mRated power - P20.55 kWRated speed3450 rpmRated voltage1 x 115/208-230 VSelected liquid temperature (°C)20Service factor1.25Shaft seal arrangementSingleSize of inlet connectionDN 32Size of outlet connectionDN 32Stages4Temperature (°C)25 bar / -20Temperature range (F)-4 - 248Type of connectionFlexiClamp
Specifications
| Approvals | CURUS |
| Approvals for drinking water | NSF61 |
| Base | Stainless steel |
| Bearing | SIC |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | CA |
| Cooling | TEFC |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Density (lb/ftBi) | 62.29 |
| Enclosure class (IEC 34-5) | IP54 |
| Flange size | 56C |
| Flange size for motor | 56C |
| Full load SF current | 11.4/6.0 - 5.7 A |
| HP | 0.75 |
| Impeller | Stainless steel |
| Impellers | 4 |
| Insulation class (IEC 85) | B |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Mains frequency | 60 Hz |
| Material code | A |
| Max ambient temperature (F) | 104 |
| Max pressure (psi) | 363 |
| Max pressure at stated temp (°C) | 25 bar / 120 |
| Maximum ambient temperature (°C) | 40 |
| Maximum head | 37.9 m |
| Maximum operating pressure (bar) | 25 |
| Model | A |
| Motor efficiency at full load | 66.0 % |
| Motor no | 84Z04001 |
| Motor standard | NEMA |
| Motor type | BALDOR |
| Number of poles | 2 |
| Number of reduced-diameter impellers | 0 |
| Pipe connection | 2 5/16 in / 1 in NPT |
| Power (P2) required by pump | 0.55 kW |
| Pressure rating for connection | PN 25 |
| Product name | CRI 3-4 A-CA-A-E-HQQE |
| Product no | 96083383 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3464 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rate flow (gpm) | 15.4 |
| Rated current | 9,60/5,00-4,80 A |
| Rated flow | 3.5 m³/h |
| Rated head | 27.6 m |
| Rated power - P2 | 0.55 kW |
| Rated speed | 3450 rpm |
| Rated voltage | 1 x 115/208-230 V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.25 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 32 |
| Size of outlet connection | DN 32 |
| Stages | 4 |
| Temperature (°C) | 25 bar / -20 |
| Temperature range (F) | -4 - 248 |
| Type of connection | FlexiClamp |
96083383
