Grundfos 96083369 CRI 3-10 A-CA-I-E-HQQE 2HP 60HZ 56C Pump End Only
- Write a review
$2,152.31
ApprovalsCEApprovals for drinking waterNSF/ANSI 61BaseStainless steelBearingSICCode for rubberECode for shaft sealHQQEConnect codeCACurve tolerance2012 3BDensity998.2 kg/m³Density (lb/ftBi)62.29Flange size56CFlange size for motor56CImpellerStainless steelImpellers10Liquid temperature range (°C)-20 - 120Low NPSHNMaterial codeAMax pressure (psi)363Max pressure at stated temp (°C)25 bar / 120Maximum head95.3 mMaximum operating pressure (bar)25ModelAMotor standardNEMANumber of reduced-diameter impellers0Pipe connection2 5/16 in / 1 in NPTPressure rating for connectionPN 25Product nameCRI 3-10 A-CA-A-E-HQQEProduct no96083369Pump orientationVerticalPump speed on which pump data are based3452 RPMPump versionAPumped liquidWaterRate flow (gpm)15.4Rated flow3.5 m³/hRated head70.3 mSelected liquid temperature (°C)20Shaft seal arrangementSingleSize of inlet connectionDN 32Size of outlet connectionDN 32Stages10Temperature (°C)25 bar / -20Temperature range (F)-4 - 248Type of connectionFlexiClamp
Specifications
| Approvals | CE |
| Approvals for drinking water | NSF/ANSI 61 |
| Base | Stainless steel |
| Bearing | SIC |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | CA |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Density (lb/ftBi) | 62.29 |
| Flange size | 56C |
| Flange size for motor | 56C |
| Impeller | Stainless steel |
| Impellers | 10 |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Material code | A |
| Max pressure (psi) | 363 |
| Max pressure at stated temp (°C) | 25 bar / 120 |
| Maximum head | 95.3 m |
| Maximum operating pressure (bar) | 25 |
| Model | A |
| Motor standard | NEMA |
| Number of reduced-diameter impellers | 0 |
| Pipe connection | 2 5/16 in / 1 in NPT |
| Pressure rating for connection | PN 25 |
| Product name | CRI 3-10 A-CA-A-E-HQQE |
| Product no | 96083369 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3452 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rate flow (gpm) | 15.4 |
| Rated flow | 3.5 m³/h |
| Rated head | 70.3 m |
| Selected liquid temperature (°C) | 20 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 32 |
| Size of outlet connection | DN 32 |
| Stages | 10 |
| Temperature (°C) | 25 bar / -20 |
| Temperature range (F) | -4 - 248 |
| Type of connection | FlexiClamp |
96083369
