Grundfos 99030082 SL1.30.A30.55.4.61R.C
- Write a review
$5,460.00
ApprovalsCSAAuto-coupling97626239Built-in motor protectionTHERMAL SWITCHCable typeSEOOW 600VControl boxnot includedCooling jacketwithout cooling jacketCos phi - p.f. at 1/2 load0.59Cos phi - p.f. at 3/4 load0.7Cos phi - power factor0.78Curve tolerance2017 3B2Density998.2 kg/m³Density (lb/ftBi)62.29Enclosure class (IEC 34-5)IP68Explosion proofNoFlange standardANSIFrame rangeCHP5.5ImpellerCast ironInst dry/wetSUBMERGEDInsulation class (IEC 85)HLength of power cable15 mLiquid temperature range (°C)10 - 40Mains frequency60 HzMax ambient temperature (F)104Max starts per hour20Maximum flow47.2 l/sMaximum head17.1 mMaximum installation depth20 mMaximum operating pressure (bar)6Maximum particle size80 mmMoisture sensorwith moisture sensorsMotorEN-GJL-250Motor efficiency at 1/2 load86.2 %Motor efficiency at 3/4 load87.8 %Motor efficiency at full load87.8 %Number of poles4Power input - P14.8 kWPressure ratingPN 10Primary shaft sealSIC/SICProduct nameSL1.30.A30 .55.4.61R.CProduct no99030082Pump housingCast ironRange of ambient temperature (°C)0 - 40Rated current16.2/9.05 ARated power - P24 kWRated speed1760 RPMRated voltage3 x 230/460V VSize of inlet connectionDN 100Size of outlet connectionDN 80Start methodstar/deltaStarting current120 AType of impellerS-TUBEType of inlet connectionANSIType of outlet connectionANSIVoltage tolerance+10/-10 %Water-in-oil sensorwithout water-in-oil sensor
Specifications
| Approvals | CSA |
| Auto-coupling | 97626239 |
| Built-in motor protection | THERMAL SWITCH |
| Cable type | SEOOW 600V |
| Control box | not included |
| Cooling jacket | without cooling jacket |
| Cos phi - p.f. at 1/2 load | 0.59 |
| Cos phi - p.f. at 3/4 load | 0.7 |
| Cos phi - power factor | 0.78 |
| Curve tolerance | 2017 3B2 |
| Density | 998.2 kg/m³ |
| Density (lb/ftBi) | 62.29 |
| Enclosure class (IEC 34-5) | IP68 |
| Explosion proof | No |
| Flange standard | ANSI |
| Frame range | C |
| HP | 5.5 |
| Impeller | Cast iron |
| Inst dry/wet | SUBMERGED |
| Insulation class (IEC 85) | H |
| Length of power cable | 15 m |
| Liquid temperature range (°C) | 10 - 40 |
| Mains frequency | 60 Hz |
| Max ambient temperature (F) | 104 |
| Max starts per hour | 20 |
| Maximum flow | 47.2 l/s |
| Maximum head | 17.1 m |
| Maximum installation depth | 20 m |
| Maximum operating pressure (bar) | 6 |
| Maximum particle size | 80 mm |
| Moisture sensor | with moisture sensors |
| Motor | EN-GJL-250 |
| Motor efficiency at 1/2 load | 86.2 % |
| Motor efficiency at 3/4 load | 87.8 % |
| Motor efficiency at full load | 87.8 % |
| Number of poles | 4 |
| Power input - P1 | 4.8 kW |
| Pressure rating | PN 10 |
| Primary shaft seal | SIC/SIC |
| Product name | SL1.30.A30 .55.4.61R.C |
| Product no | 99030082 |
| Pump housing | Cast iron |
| Range of ambient temperature (°C) | 0 - 40 |
| Rated current | 16.2/9.05 A |
| Rated power - P2 | 4 kW |
| Rated speed | 1760 RPM |
| Rated voltage | 3 x 230/460V V |
| Size of inlet connection | DN 100 |
| Size of outlet connection | DN 80 |
| Start method | star/delta |
| Starting current | 120 A |
| Type of impeller | S-TUBE |
| Type of inlet connection | ANSI |
| Type of outlet connection | ANSI |
| Voltage tolerance | +10/-10 % |
| Water-in-oil sensor | without water-in-oil sensor |
99030082
