Grundfos 29Z53005 CR 32-2-2 U-G-A-E-KUBE 1PH 60 TEFC
- Write a review
$5,277.28
Actual impeller diameter118.4 mmApprovalsCURUSApprovals for drinking waterNSF61BaseCast ironBearingSICCode for rubberECode for shaft sealHQQEConnect codeGCoolingTEFCCurve tolerance2012 3BDensity998.2 kg/m³Density (lb/ftBi)62.29DOE pump energy index CL0.87Flange rating inlet150 lbFlange size213TCFlange size for motor213TCFull load SF current39.3-35.5 AHP7.5IE efficiency82%ImpellerStainless steelImpellers2Insulation class (IEC 85)FKVA codeFLiquid temperature range (°C)-30 - 120Low NPSHNMains frequency60 HzMaterial codeAMax ambient temperature (F)104Max pressure (psi)232Max pressure at stated temp (°C)16 bar / 120Maximum ambient temperature (°C)40Maximum head45.7 mMaximum operating pressure (bar)16ModelBMotor efficiency at full load82 %Motor no85700017Motor standardNEMAMotor typeBALDORNumber of poles2Number of reduced-diameter impellers2Pipe connection2 1/2 inPower (P2) required by pump5.5 kWPressure rating for connectionPN 16Product nameCR 32-2-2 A-G-A-E-HQQEProduct no29Z53005Pump no96418591Pump orientationVerticalPump speed on which pump data are based3508 RPMPump versionAPumped liquidWaterRate flow (gpm)141Rated current33.8-31.0 ARated flow36 m³/hRated head33.5 mRated power - P25.5 kWRated speed3450 rpmRated voltage1 x 208-230 VSales regionNamregSelected liquid temperature (°C)20Service factor1.15Shaft seal arrangementSingleSize of inlet connection2 1/2 inSize of outlet connection2 1/2 inStages2Support bearingGraflonTemperature (°C)16 bar / -30Temperature range (F)32 - 248Type of connectionANSI
Specifications
| Actual impeller diameter | 118.4 mm |
| Approvals | CURUS |
| Approvals for drinking water | NSF61 |
| Base | Cast iron |
| Bearing | SIC |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | G |
| Cooling | TEFC |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Density (lb/ftBi) | 62.29 |
| DOE pump energy index CL | 0.87 |
| Flange rating inlet | 150 lb |
| Flange size | 213TC |
| Flange size for motor | 213TC |
| Full load SF current | 39.3-35.5 A |
| HP | 7.5 |
| IE efficiency | 82% |
| Impeller | Stainless steel |
| Impellers | 2 |
| Insulation class (IEC 85) | F |
| KVA code | F |
| Liquid temperature range (°C) | -30 - 120 |
| Low NPSH | N |
| Mains frequency | 60 Hz |
| Material code | A |
| Max ambient temperature (F) | 104 |
| Max pressure (psi) | 232 |
| Max pressure at stated temp (°C) | 16 bar / 120 |
| Maximum ambient temperature (°C) | 40 |
| Maximum head | 45.7 m |
| Maximum operating pressure (bar) | 16 |
| Model | B |
| Motor efficiency at full load | 82 % |
| Motor no | 85700017 |
| Motor standard | NEMA |
| Motor type | BALDOR |
| Number of poles | 2 |
| Number of reduced-diameter impellers | 2 |
| Pipe connection | 2 1/2 in |
| Power (P2) required by pump | 5.5 kW |
| Pressure rating for connection | PN 16 |
| Product name | CR 32-2-2 A-G-A-E-HQQE |
| Product no | 29Z53005 |
| Pump no | 96418591 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3508 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rate flow (gpm) | 141 |
| Rated current | 33.8-31.0 A |
| Rated flow | 36 m³/h |
| Rated head | 33.5 m |
| Rated power - P2 | 5.5 kW |
| Rated speed | 3450 rpm |
| Rated voltage | 1 x 208-230 V |
| Sales region | Namreg |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.15 |
| Shaft seal arrangement | Single |
| Size of inlet connection | 2 1/2 in |
| Size of outlet connection | 2 1/2 in |
| Stages | 2 |
| Support bearing | Graflon |
| Temperature (°C) | 16 bar / -30 |
| Temperature range (F) | 32 - 248 |
| Type of connection | ANSI |
29Z53005
