Actual impeller diameter86 mmApprovals on motor nameplateUL Recognized Component, CSACountry codeNamregCurve tolerance2012 3B2Density998.2 kg/m³Density (lb/ftBi)62.29Flange standardUSAFull load SF current1.8/.9 AHP0.33ImpellerStainless steelInsulation class (IEC 85)BKVA codeMLiquid temperature range (°C)-15 - 140Mains frequency60 HzMax ambient temperature (F)104Maximum operating pressure (bar)10Motor no84652601Motor typeBaldor, TEFCPipe connection1 1/4 inPrimary shaft sealBUBEProduct nameTP 32-40/4 A-G-A-BUBE-DY4Product no96411779Pump housingCast ironPump no96405247Pumped liquidWaterRange of ambient temperature (°C)-30 - 55Rate flow (gpm)30.8Rated current1,9-1,6/0,8 ARated flow7 m³/hRated head2.9 mRated power - P20.25 kWRated speed1725 RPMRated voltage3 x 208-230/460 VSelected liquid temperature (°C)20Service factor1.35Temperature range (F)5 .. 284
| Actual impeller diameter | 86 mm |
| Approvals on motor nameplate | UL Recognized Component, CSA |
| Country code | Namreg |
| Curve tolerance | 2012 3B2 |
| Density | 998.2 kg/m³ |
| Density (lb/ftBi) | 62.29 |
| Flange standard | USA |
| Full load SF current | 1.8/.9 A |
| HP | 0.33 |
| Impeller | Stainless steel |
| Insulation class (IEC 85) | B |
| KVA code | M |
| Liquid temperature range (°C) | -15 - 140 |
| Mains frequency | 60 Hz |
| Max ambient temperature (F) | 104 |
| Maximum operating pressure (bar) | 10 |
| Motor no | 84652601 |
| Motor type | Baldor, TEFC |
| Pipe connection | 1 1/4 in |
| Primary shaft seal | BUBE |
| Product name | TP 32-40/4 A-G-A-BUBE-DY4 |
| Product no | 96411779 |
| Pump housing | Cast iron |
| Pump no | 96405247 |
| Pumped liquid | Water |
| Range of ambient temperature (°C) | -30 - 55 |
| Rate flow (gpm) | 30.8 |
| Rated current | 1,9-1,6/0,8 A |
| Rated flow | 7 m³/h |
| Rated head | 2.9 m |
| Rated power - P2 | 0.25 kW |
| Rated speed | 1725 RPM |
| Rated voltage | 3 x 208-230/460 V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.35 |
| Temperature range (F) | 5 .. 284 |