Grundfos 99916281 CR3-9 A-FGJ-A-E-HQQE 1X115/230 60HZ
- Write a review
$4,908.33
ApprovalsCURUSApprovals for drinking waterNSF/ANSI 61BaseCast ironBearingSICBuilt-in motor protectionPTOCode for rubberECode for shaft sealHQQEConnect codeFGJCoolingIC 411Cos phi - power factor0.97Curve tolerance2012 3BDensity998.2 kg/m³Enclosure class (IEC 34-5)IP55Flange rating inlet250 lbFlange size for motor56CFull load SF current15.2/6.6 AIE efficiency75.0%ImpellerStainless steelImpellers9Insulation class (IEC 85)FLiquid temperature range (°C)-20 - 120Low NPSHNMains frequency60 HzMaterial codeAMax pressure at stated temp (°C)25 bar / 120Maximum ambient temperature (°C)40Maximum head85.6 mMaximum operating pressure (bar)25ModelAMotor efficiency at 1/2 load66.0 %Motor efficiency at 3/4 load73.0 %Motor efficiency at full load75.0 %Motor no99883319Motor standardNEMAMotor typeWEGNumber of poles2Number of reduced-diameter impellers0Power (P2) required by pump1.1 kWPressure rating for connectionPN 25Product nameCR 3-9 A-FGJ-A-E-HQQEProduct no99916281Pump orientationVerticalPump speed on which pump data are based3450 rpmPump versionAPumped liquidWaterRated current13,2/7,3-6,6 ARated flow3.5 m³/hRated head63 mRated power - P21.1 kWRated speed3500 RPMRated voltage1 x 115/208-230 VSelected liquid temperature (°C)20Service factor1.15Shaft seal arrangementSingleSize of inlet connectionDN 25/32Size of outlet connectionDN 25/32Stages9Starting current800-800 %Temperature (°C)25 bar / -20Type of connectionDIN / ANSI / JIS
Specifications
| Approvals | CURUS |
| Approvals for drinking water | NSF/ANSI 61 |
| Base | Cast iron |
| Bearing | SIC |
| Built-in motor protection | PTO |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | FGJ |
| Cooling | IC 411 |
| Cos phi - power factor | 0.97 |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Enclosure class (IEC 34-5) | IP55 |
| Flange rating inlet | 250 lb |
| Flange size for motor | 56C |
| Full load SF current | 15.2/6.6 A |
| IE efficiency | 75.0% |
| Impeller | Stainless steel |
| Impellers | 9 |
| Insulation class (IEC 85) | F |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Mains frequency | 60 Hz |
| Material code | A |
| Max pressure at stated temp (°C) | 25 bar / 120 |
| Maximum ambient temperature (°C) | 40 |
| Maximum head | 85.6 m |
| Maximum operating pressure (bar) | 25 |
| Model | A |
| Motor efficiency at 1/2 load | 66.0 % |
| Motor efficiency at 3/4 load | 73.0 % |
| Motor efficiency at full load | 75.0 % |
| Motor no | 99883319 |
| Motor standard | NEMA |
| Motor type | WEG |
| Number of poles | 2 |
| Number of reduced-diameter impellers | 0 |
| Power (P2) required by pump | 1.1 kW |
| Pressure rating for connection | PN 25 |
| Product name | CR 3-9 A-FGJ-A-E-HQQE |
| Product no | 99916281 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3450 rpm |
| Pump version | A |
| Pumped liquid | Water |
| Rated current | 13,2/7,3-6,6 A |
| Rated flow | 3.5 m³/h |
| Rated head | 63 m |
| Rated power - P2 | 1.1 kW |
| Rated speed | 3500 RPM |
| Rated voltage | 1 x 115/208-230 V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.15 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 25/32 |
| Size of outlet connection | DN 25/32 |
| Stages | 9 |
| Starting current | 800-800 % |
| Temperature (°C) | 25 bar / -20 |
| Type of connection | DIN / ANSI / JIS |
99916281