- New
Grundfos 96081408 CRI 1S-6 A-FGJ-I-E-HQQE 1PH 0.5HP TEFC 60
- Write a review
$1,514.50
ApprovalsCURUSApprovals for drinking waterNSF61BaseStainless steelBearingSICCode for rubberECode for shaft sealHQQEConnect codeFGJCoolingTEFCCurve tolerance2012 3BDensity998.2 kg/m³Density (lb/ftBi)62.29Enclosure class (IEC 34-5)IP54Flange rating inlet300 lbFlange size56CFlange size for motor56CFull load SF current9.8/4.9 AHP0.5IE efficiency62%ImpellerStainless steelImpellers6Insulation class (IEC 85)BLiquid temperature range (°C)-20 - 120Low NPSHNMains frequency60 HzMaterial codeAMax ambient temperature (F)104Max pressure (psi)363Max pressure at stated temp (°C)25 bar / 120Maximum ambient temperature (°C)40Maximum head50 mMaximum operating pressure (bar)25ModelAMotor efficiency at full load62 %Motor no85700002Motor standardNEMAMotor typeBALDORNumber of poles2Number of reduced-diameter impellers0Pipe connection1 1/4 inPower (P2) required by pump0.37 kWPressure rating for connectionPN 25Product nameCRI 1S-6 A-FGJ-A-E-HQQEProduct no96081408Pump orientationVerticalPump speed on which pump data are based3443 RPMPump versionAPumped liquidWaterRate flow (gpm)4.4Rated current7.4/3.7 ARated flow1.1 m³/hRated head33.6 mRated power - P20.37 kWRated speed3450 rpmRated voltage1 x 115/230 VSelected liquid temperature (°C)20Service factor1.60Shaft seal arrangementSingleSize of inlet connectionDN 25/32Size of outlet connectionDN 25/32Stages6Temperature (°C)25 bar / -20Temperature range (F)-4 - 248Type of connectionDIN / ANSI / JIS
Specifications
| Approvals | CURUS |
| Approvals for drinking water | NSF61 |
| Base | Stainless steel |
| Bearing | SIC |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | FGJ |
| Cooling | TEFC |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Density (lb/ftBi) | 62.29 |
| Enclosure class (IEC 34-5) | IP54 |
| Flange rating inlet | 300 lb |
| Flange size | 56C |
| Flange size for motor | 56C |
| Full load SF current | 9.8/4.9 A |
| HP | 0.5 |
| IE efficiency | 62% |
| Impeller | Stainless steel |
| Impellers | 6 |
| Insulation class (IEC 85) | B |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Mains frequency | 60 Hz |
| Material code | A |
| Max ambient temperature (F) | 104 |
| Max pressure (psi) | 363 |
| Max pressure at stated temp (°C) | 25 bar / 120 |
| Maximum ambient temperature (°C) | 40 |
| Maximum head | 50 m |
| Maximum operating pressure (bar) | 25 |
| Model | A |
| Motor efficiency at full load | 62 % |
| Motor no | 85700002 |
| Motor standard | NEMA |
| Motor type | BALDOR |
| Number of poles | 2 |
| Number of reduced-diameter impellers | 0 |
| Pipe connection | 1 1/4 in |
| Power (P2) required by pump | 0.37 kW |
| Pressure rating for connection | PN 25 |
| Product name | CRI 1S-6 A-FGJ-A-E-HQQE |
| Product no | 96081408 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3443 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rate flow (gpm) | 4.4 |
| Rated current | 7.4/3.7 A |
| Rated flow | 1.1 m³/h |
| Rated head | 33.6 m |
| Rated power - P2 | 0.37 kW |
| Rated speed | 3450 rpm |
| Rated voltage | 1 x 115/230 V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.60 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 25/32 |
| Size of outlet connection | DN 25/32 |
| Stages | 6 |
| Temperature (°C) | 25 bar / -20 |
| Temperature range (F) | -4 - 248 |
| Type of connection | DIN / ANSI / JIS |
96081408
