Actual impeller diameter86 mmApprovals on motor nameplateUL Recognized Component, CSACountry codeNamregCurve tolerance2012 3B2Density998.2 kg/m³Density (lb/ftBi)62.29Flange standardUSAFull load SF current11,4/6-5,7 AHP0.75ImpellerStainless steelInsulation class (IEC 85)BKVA codeKLiquid temperature range (°C)-15 - 140Mains frequency60 HzMax ambient temperature (F)104Maximum ambient temperature (°C)40Maximum operating pressure (bar)10Motor no84Z04001Motor typeBaldor, TEFCPipe connection1 1/2 inPrimary shaft sealBUBEProduct nameTP 40-160/2 A-G-A-BUBE-FY2Product no96411798Pump housingCast ironPump no96405257Pumped liquidWaterRate flow (gpm)59.4Rated current9,6/5-4,8 ARated flow13.5 m³/hRated head10.9 mRated power - P20.55 kWRated speed3450 rpmRated voltage1 x 115/208-230 VSelected liquid temperature (°C)20Service factor1.25Temperature range (F)5 .. 284
| Actual impeller diameter | 86 mm |
| Approvals on motor nameplate | UL Recognized Component, CSA |
| Country code | Namreg |
| Curve tolerance | 2012 3B2 |
| Density | 998.2 kg/m³ |
| Density (lb/ftBi) | 62.29 |
| Flange standard | USA |
| Full load SF current | 11,4/6-5,7 A |
| HP | 0.75 |
| Impeller | Stainless steel |
| Insulation class (IEC 85) | B |
| KVA code | K |
| Liquid temperature range (°C) | -15 - 140 |
| Mains frequency | 60 Hz |
| Max ambient temperature (F) | 104 |
| Maximum ambient temperature (°C) | 40 |
| Maximum operating pressure (bar) | 10 |
| Motor no | 84Z04001 |
| Motor type | Baldor, TEFC |
| Pipe connection | 1 1/2 in |
| Primary shaft seal | BUBE |
| Product name | TP 40-160/2 A-G-A-BUBE-FY2 |
| Product no | 96411798 |
| Pump housing | Cast iron |
| Pump no | 96405257 |
| Pumped liquid | Water |
| Rate flow (gpm) | 59.4 |
| Rated current | 9,6/5-4,8 A |
| Rated flow | 13.5 m³/h |
| Rated head | 10.9 m |
| Rated power - P2 | 0.55 kW |
| Rated speed | 3450 rpm |
| Rated voltage | 1 x 115/208-230 V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.25 |
| Temperature range (F) | 5 .. 284 |