Grundfos 91545155 10S10-15 WITHOUT CONTROL BOX 3-WIRE
- Write a review
$1,576.97
Applic motorGrundfosApprovalsCE,EAC,CSACOMP,URAxial load max350 kgBuilt-in motor protectionCONTACTBuilt-in temp transmitterNoCos phi - power factor0.82Ctrl box prodno91126155Curve tolerance2012 3BDensity998.2 kg/m³Density (lb/ftBi)62.29Enclosure class (IEC 34-5)IP68ErP statusEuP Standalone/Prod.HP1ImpellerStainless steelInsulation class (IEC 85)BKVA codeKMains frequency60 HzMax liquid t at 0.15 m/sec (°C)40Maximum ambient pressure (bar)15Maximum liquid temperature (°C)60ModelAMotorStainless steelMotor diameter4 inMotor no79453104Motor typeMS402Motor type 1-phaseCSIRMotor versionT40Power (P2) required by pump0.75 kWProduct name10S10-15Product no91545155PumpStainless steelPump no09010015Pump outlet1 1/4 in NPTPump speed on which pump data are based3450 rpmPumped liquidWaterRated current9.8 ARated flow2 m³/hRated head88 mRated power - P20.75 kWRated speed3450 rpmRated voltage1 x 230 VSales regionNamregSelected liquid temperature (°C)20Service factor1.40Shaft seal for motorLIPSEALSpecification for shaft endSPLINEStages15Start methoddirect-on-lineStarting current430 %Thermal protecinternalValveYESWindingsEnamelled
Specifications
| Applic motor | Grundfos |
| Approvals | CE,EAC,CSACOMP,UR |
| Axial load max | 350 kg |
| Built-in motor protection | CONTACT |
| Built-in temp transmitter | No |
| Cos phi - power factor | 0.82 |
| Ctrl box prodno | 91126155 |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Density (lb/ftBi) | 62.29 |
| Enclosure class (IEC 34-5) | IP68 |
| ErP status | EuP Standalone/Prod. |
| HP | 1 |
| Impeller | Stainless steel |
| Insulation class (IEC 85) | B |
| KVA code | K |
| Mains frequency | 60 Hz |
| Max liquid t at 0.15 m/sec (°C) | 40 |
| Maximum ambient pressure (bar) | 15 |
| Maximum liquid temperature (°C) | 60 |
| Model | A |
| Motor | Stainless steel |
| Motor diameter | 4 in |
| Motor no | 79453104 |
| Motor type | MS402 |
| Motor type 1-phase | CSIR |
| Motor version | T40 |
| Power (P2) required by pump | 0.75 kW |
| Product name | 10S10-15 |
| Product no | 91545155 |
| Pump | Stainless steel |
| Pump no | 09010015 |
| Pump outlet | 1 1/4 in NPT |
| Pump speed on which pump data are based | 3450 rpm |
| Pumped liquid | Water |
| Rated current | 9.8 A |
| Rated flow | 2 m³/h |
| Rated head | 88 m |
| Rated power - P2 | 0.75 kW |
| Rated speed | 3450 rpm |
| Rated voltage | 1 x 230 V |
| Sales region | Namreg |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.40 |
| Shaft seal for motor | LIPSEAL |
| Specification for shaft end | SPLINE |
| Stages | 15 |
| Start method | direct-on-line |
| Starting current | 430 % |
| Thermal protec | internal |
| Valve | YES |
| Windings | Enamelled |
91545155
