Grundfos 91159312 AGA KUBE 3KW 50 Pump End Only
- Write a review
$3,358.33
ApprovalsCE,EAC,UKCA,SEPROApprovals for drinking waterACSBaseCast ironCode for rubberECode for shaft sealHQQEConnect codeGCurve tolerance2012 3BDensity998.2 kg/m³Flange rating inlet150 lbFlange size for motorFT130ImpellerStainless steelImpellers1Liquid temperature range (°C)-30 - 120Low NPSHNMaterial codeAMax pressure at stated temp (°C)16 bar / 120Maximum head21.4 mMaximum operating pressure (bar)16Minimum efficiency index, MEI ≥0.70ModelBMotor standardIECNumber of reduced-diameter impellers1Power (P2) required by pump3 kWPressure rating for connectionPN 16Pressure sensorNProduct nameCR 45-1-1 A-G-A-E-HQQEProduct no91159312Pump orientationVerticalPump speed on which pump data are based2902 RPMPump versionAPumped liquidWaterRated flow45 m³/hRated head15 mSelected liquid temperature (°C)20Shaft seal arrangementSingleSize of inlet connection3 inSize of outlet connection3 inStages1Support bearingGraflonTemperature (°C)16 bar / -30Type of connectionANSI
Specifications
| Approvals | CE,EAC,UKCA,SEPRO |
| Approvals for drinking water | ACS |
| Base | Cast iron |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | G |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Flange rating inlet | 150 lb |
| Flange size for motor | FT130 |
| Impeller | Stainless steel |
| Impellers | 1 |
| Liquid temperature range (°C) | -30 - 120 |
| Low NPSH | N |
| Material code | A |
| Max pressure at stated temp (°C) | 16 bar / 120 |
| Maximum head | 21.4 m |
| Maximum operating pressure (bar) | 16 |
| Minimum efficiency index, MEI ≥ | 0.70 |
| Model | B |
| Motor standard | IEC |
| Number of reduced-diameter impellers | 1 |
| Power (P2) required by pump | 3 kW |
| Pressure rating for connection | PN 16 |
| Pressure sensor | N |
| Product name | CR 45-1-1 A-G-A-E-HQQE |
| Product no | 91159312 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 2902 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rated flow | 45 m³/h |
| Rated head | 15 m |
| Selected liquid temperature (°C) | 20 |
| Shaft seal arrangement | Single |
| Size of inlet connection | 3 in |
| Size of outlet connection | 3 in |
| Stages | 1 |
| Support bearing | Graflon |
| Temperature (°C) | 16 bar / -30 |
| Type of connection | ANSI |
91159312
