Grundfos 96847183 Unilift Ap50.50.11.a1.v 25' Cord S.s.
- Write a review
$1,948.44
ApprovalsCCSAUS,PROP65Built-in motor protectionCONTACTCable unionBrassCapacitor size - run20 µF/400 VCos phi - power factor0.98Density998.2 kg/m³Enclosure class (IEC 34-5)IP68ImpellerStainless steelInst dry/wetD/SInsulation class (IEC 85)FLength of power cable7.6 mLevel switchfloat switchLiquid temperature range (°C)0 - 55Mains frequency60 HzMax particle50 mmMaximum flow7.78 l/sMaximum head12.5 mMaximum installation depth7.62 mMotor type 1-phasePSCPlace of installationIndoor/outdoorPower input P11.8 kWProduct nameUNILIFT AP50.50.11.A1VProduct no96847183Pump housingStainless steelRange of ambient temperature (°C)0 - 55Rated current8.4 ARated power - P21.2 kWRated speed3360 RPMRated voltage1 x 220-230 VSize of connection2 inThermal protecinternalType of connectionNPT(F)Type of impellerVORTEX
Specifications
| Approvals | CCSAUS,PROP65 |
| Built-in motor protection | CONTACT |
| Cable union | Brass |
| Capacitor size - run | 20 µF/400 V |
| Cos phi - power factor | 0.98 |
| Density | 998.2 kg/m³ |
| Enclosure class (IEC 34-5) | IP68 |
| Impeller | Stainless steel |
| Inst dry/wet | D/S |
| Insulation class (IEC 85) | F |
| Length of power cable | 7.6 m |
| Level switch | float switch |
| Liquid temperature range (°C) | 0 - 55 |
| Mains frequency | 60 Hz |
| Max particle | 50 mm |
| Maximum flow | 7.78 l/s |
| Maximum head | 12.5 m |
| Maximum installation depth | 7.62 m |
| Motor type 1-phase | PSC |
| Place of installation | Indoor/outdoor |
| Power input P1 | 1.8 kW |
| Product name | UNILIFT AP50.50.11.A1V |
| Product no | 96847183 |
| Pump housing | Stainless steel |
| Range of ambient temperature (°C) | 0 - 55 |
| Rated current | 8.4 A |
| Rated power - P2 | 1.2 kW |
| Rated speed | 3360 RPM |
| Rated voltage | 1 x 220-230 V |
| Size of connection | 2 in |
| Thermal protec | internal |
| Type of connection | NPT(F) |
| Type of impeller | VORTEX |
96847183
