Grundfos 96585786 PUMP END CR15-09
- Write a review
$4,817.22
Actual impeller diameter105 mmApprovalsCEBaseCast ironCode for rubberECode for shaft sealHQQEConnect codeGJCurve tolerance2012 3BDOE pump energy index CL0.93Flange rating inlet300 lbFlange size for motor254TCImpellerStainless steelImpellers9Liquid temperature range (°C)-20 - 120Low NPSHYMaterial codeAMax pressure at stated temp (°C)25 bar / 120Maximum head188.1 mMaximum operating pressure (bar)25ModelAMotor standardNEMANumber of reduced-diameter impellers0Pressure rating for connectionPN 25Pressure sensorNProduct nameCR 15-9 K-GJ-A-E-HQQEProduct no96585786Pump orientationVerticalPump speed on which pump data are based3509 rpmPump versionKRated flow20.5 m³/hRated head153.7 mShaft seal arrangementSingleSize of inlet connectionDN 50Size of outlet connectionDN 50Stages9Temperature (°C)25 bar / -20Type of connectionANSI / JIS
Specifications
| Actual impeller diameter | 105 mm |
| Approvals | CE |
| Base | Cast iron |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | GJ |
| Curve tolerance | 2012 3B |
| DOE pump energy index CL | 0.93 |
| Flange rating inlet | 300 lb |
| Flange size for motor | 254TC |
| Impeller | Stainless steel |
| Impellers | 9 |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | Y |
| Material code | A |
| Max pressure at stated temp (°C) | 25 bar / 120 |
| Maximum head | 188.1 m |
| Maximum operating pressure (bar) | 25 |
| Model | A |
| Motor standard | NEMA |
| Number of reduced-diameter impellers | 0 |
| Pressure rating for connection | PN 25 |
| Pressure sensor | N |
| Product name | CR 15-9 K-GJ-A-E-HQQE |
| Product no | 96585786 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3509 rpm |
| Pump version | K |
| Rated flow | 20.5 m³/h |
| Rated head | 153.7 m |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 50 |
| Size of outlet connection | DN 50 |
| Stages | 9 |
| Temperature (°C) | 25 bar / -20 |
| Type of connection | ANSI / JIS |
96585786
