ApprovalsCCC,CEL,EACApprovals for drinking waterWRAS,ACS,NSF61Cable included (yes/no)NCode for rubberECode for shaft sealAQQEConnect codeRCurve tolerance2012 3BDensity998.2 kg/m³Enclosure class (IEC 34-5)IP55Frame size90SFIE efficiency classIE2ImpellerStainless steelImpellers1Insulation class (IEC 85)FLiquid temperature range (°C)-20 - 90Mains frequency50 HzMaterial codeAMax pressure at stated temp (°C)10 bar / 90Maximum operating pressure (bar)10Minimum efficiency index, MEI ≥0.7ModelAMotor standardIECProduct nameCM 25-1 A-R-A-E-AQQE F-A-A-NProduct no97C16584Pump housingCast ironPump speed on which pump data are based2900 rpmPump versionAPumped liquidWaterRange of ambient temperature (°C)-20 - 55Rated current8.30/4.80 ARated flow22 m³/hRated head16.18 mRated power - P22.2 kWRated speed2880-2910 rpmRated voltage3 x 220-240D/380-415Y VSelected liquid temperature (°C)20Service factor1.00Size of inlet connection2 inSize of outlet connection2 inStarting current720-790 %Suitable for 50/60 HzNTemperature (°C)10 bar / 90Terminal box position12Type of connectionRp
| Approvals | CCC,CEL,EAC |
| Approvals for drinking water | WRAS,ACS,NSF61 |
| Cable included (yes/no) | N |
| Code for rubber | E |
| Code for shaft seal | AQQE |
| Connect code | R |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Enclosure class (IEC 34-5) | IP55 |
| Frame size | 90SF |
| IE efficiency class | IE2 |
| Impeller | Stainless steel |
| Impellers | 1 |
| Insulation class (IEC 85) | F |
| Liquid temperature range (°C) | -20 - 90 |
| Mains frequency | 50 Hz |
| Material code | A |
| Max pressure at stated temp (°C) | 10 bar / 90 |
| Maximum operating pressure (bar) | 10 |
| Minimum efficiency index, MEI ≥ | 0.7 |
| Model | A |
| Motor standard | IEC |
| Product name | CM 25-1 A-R-A-E-AQQE F-A-A-N |
| Product no | 97C16584 |
| Pump housing | Cast iron |
| Pump speed on which pump data are based | 2900 rpm |
| Pump version | A |
| Pumped liquid | Water |
| Range of ambient temperature (°C) | -20 - 55 |
| Rated current | 8.30/4.80 A |
| Rated flow | 22 m³/h |
| Rated head | 16.18 m |
| Rated power - P2 | 2.2 kW |
| Rated speed | 2880-2910 rpm |
| Rated voltage | 3 x 220-240D/380-415Y V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.00 |
| Size of inlet connection | 2 in |
| Size of outlet connection | 2 in |
| Starting current | 720-790 % |
| Suitable for 50/60 Hz | N |
| Temperature (°C) | 10 bar / 90 |
| Terminal box position | 12 |
| Type of connection | Rp |