Grundfos 96126918 CR 15-10 A-GJ-A-E-HQQE ( "PUMP-END "ONLY "NO MOTOR" For the CR15-10 W/HQQE )
- Write a review
$4,401.94
Actual impeller diameter104.8 mmApprovalsCEApprovals for drinking waterNSF/ANSI 61BaseCast ironBearingSICCode for rubberECode for shaft sealHQQEConnect codeGJCurve tolerance2012 3BDensity998.2 kg/m³DOE pump energy index CL0.91Flange rating inlet300 lbFlange size for motor254TCImpellerStainless steelImpellers10Liquid temperature range (°C)-20 - 120Low NPSHNMaterial codeAMax pressure at stated temp (°C)25 bar / 120Maximum head203 mMaximum operating pressure (bar)25ModelAMotor standardNEMANumber of reduced-diameter impellers0Pressure rating for connectionPN 25Product nameCR 15-10 A-GJ-A-E-HQQEProduct no96126918Pump orientationVerticalPump speed on which pump data are based3497 RPMPump versionAPumped liquidWaterRated flow20.5 m³/hRated head161.5 mSelected liquid temperature (°C)20Shaft seal arrangementSingleSize of inlet connectionDN 50Size of outlet connectionDN 50Stages10Temperature (°C)25 bar / -20Type of connectionANSI / JIS
Specifications
| Actual impeller diameter | 104.8 mm |
| Approvals | CE |
| Approvals for drinking water | NSF/ANSI 61 |
| Base | Cast iron |
| Bearing | SIC |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | GJ |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| DOE pump energy index CL | 0.91 |
| Flange rating inlet | 300 lb |
| Flange size for motor | 254TC |
| Impeller | Stainless steel |
| Impellers | 10 |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Material code | A |
| Max pressure at stated temp (°C) | 25 bar / 120 |
| Maximum head | 203 m |
| Maximum operating pressure (bar) | 25 |
| Model | A |
| Motor standard | NEMA |
| Number of reduced-diameter impellers | 0 |
| Pressure rating for connection | PN 25 |
| Product name | CR 15-10 A-GJ-A-E-HQQE |
| Product no | 96126918 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3497 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rated flow | 20.5 m³/h |
| Rated head | 161.5 m |
| Selected liquid temperature (°C) | 20 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 50 |
| Size of outlet connection | DN 50 |
| Stages | 10 |
| Temperature (°C) | 25 bar / -20 |
| Type of connection | ANSI / JIS |
96126918