Grundfos 96705044 PN-GJ-A-E-HQQE 3x208-230 60 HZ 96705044
- Write a review
$3,229.06
ApprovalsCURUSApprovals for drinking waterNSF61BaseCast ironBearingSICCode for rubberECode for shaft sealHQQEConfig. file no98558236Connect codeGJCos phi - power factor0.94Curve tolerance2012 3BDensity998.2 kg/m³Enclosure class (IEC 34-5)IP55Flange rating inlet300 lbFlange size for motor56CFrequency converterBuilt-inIE efficiencyIE2 82,5%IE Efficiency classNEMA Energy / IE2 60Hz / NRCImpellerStainless steelImpellers2Insulation class (IEC 85)FLiquid temperature range (°C)-20 - 120Low NPSHNMains frequency60 HzMaterial codeAMax pressure at stated temp (°C)16 bar / 120Maximum ambient temperature (°C)40Maximum head29.2 mMaximum operating pressure (bar)16ModelAMotor efficiency at full load76.8 %Motor no85904400Motor standardNEMAMotor type90CCNumber of poles2Power (P2) required by pump1.1 kWPressure rating for connectionPN 25Pressure sensorYProduct nameCRE 10-2 PN-GJ-A-E-HQQEProduct no96705044Pump orientationVerticalPump speed on which pump data are based3466 RPMPump versionPNPumped liquidWaterRated current4.35 ARated flow12.1 m³/hRated power - P21.1 kWRated speed3480 RPMRated voltage3 x 208-230 VSelected liquid temperature (°C)20Service factor1.07Shaft seal arrangementSingleSize of inlet connectionDN 50Size of outlet connectionDN 50Stages2Temperature (°C)16 bar / -20Type of connectionANSI / JIS
Specifications
| Approvals | CURUS |
| Approvals for drinking water | NSF61 |
| Base | Cast iron |
| Bearing | SIC |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Config. file no | 98558236 |
| Connect code | GJ |
| Cos phi - power factor | 0.94 |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Enclosure class (IEC 34-5) | IP55 |
| Flange rating inlet | 300 lb |
| Flange size for motor | 56C |
| Frequency converter | Built-in |
| IE efficiency | IE2 82,5% |
| IE Efficiency class | NEMA Energy / IE2 60Hz / NRC |
| Impeller | Stainless steel |
| Impellers | 2 |
| Insulation class (IEC 85) | F |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Mains frequency | 60 Hz |
| Material code | A |
| Max pressure at stated temp (°C) | 16 bar / 120 |
| Maximum ambient temperature (°C) | 40 |
| Maximum head | 29.2 m |
| Maximum operating pressure (bar) | 16 |
| Model | A |
| Motor efficiency at full load | 76.8 % |
| Motor no | 85904400 |
| Motor standard | NEMA |
| Motor type | 90CC |
| Number of poles | 2 |
| Power (P2) required by pump | 1.1 kW |
| Pressure rating for connection | PN 25 |
| Pressure sensor | Y |
| Product name | CRE 10-2 PN-GJ-A-E-HQQE |
| Product no | 96705044 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3466 RPM |
| Pump version | PN |
| Pumped liquid | Water |
| Rated current | 4.35 A |
| Rated flow | 12.1 m³/h |
| Rated power - P2 | 1.1 kW |
| Rated speed | 3480 RPM |
| Rated voltage | 3 x 208-230 V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.07 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 50 |
| Size of outlet connection | DN 50 |
| Stages | 2 |
| Temperature (°C) | 16 bar / -20 |
| Type of connection | ANSI / JIS |
96705044