Grundfos 96621872 CR20-12-A-GJ-A-E-HQQE FF300 50 HZ Pump Only
- Write a review
$6,173.56
ApprovalsCE,EAC,UKCA,SEPROApprovals for drinking waterWRAS,ACSBaseCast ironCode for rubberECode for shaft sealHQQEConnect codeGJCurve tolerance2012 3BDensity998.2 kg/m³Flange rating inlet250 lbFlange size for motorFF300ImpellerStainless steelImpellers12Liquid temperature range (°C)-20 - 120Low NPSHNMaterial codeAMax pressure at stated temp (°C)25 bar / 120Maximum head178 mMaximum operating pressure (bar)25Minimum efficiency index, MEI ≥0.70ModelAMotor standardIECNumber of reduced-diameter impellers0Power (P2) required by pump15 kWPressure rating for connectionPN 25Pressure sensorNProduct nameCR 20-12 A-GJ-A-E-HQQEProduct no96621872Pump orientationVerticalPump speed on which pump data are based2923 RPMPump versionAPumped liquidWaterRated flow21 m³/hRated head142.7 mSelected liquid temperature (°C)20Shaft seal arrangementSingleSize of inlet connectionDN 50Size of outlet connectionDN 50Stages12Temperature (°C)25 bar / -20Type of connectionANSI / JIS
Specifications
| Approvals | CE,EAC,UKCA,SEPRO |
| Approvals for drinking water | WRAS,ACS |
| Base | Cast iron |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | GJ |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Flange rating inlet | 250 lb |
| Flange size for motor | FF300 |
| Impeller | Stainless steel |
| Impellers | 12 |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Material code | A |
| Max pressure at stated temp (°C) | 25 bar / 120 |
| Maximum head | 178 m |
| Maximum operating pressure (bar) | 25 |
| Minimum efficiency index, MEI ≥ | 0.70 |
| Model | A |
| Motor standard | IEC |
| Number of reduced-diameter impellers | 0 |
| Power (P2) required by pump | 15 kW |
| Pressure rating for connection | PN 25 |
| Pressure sensor | N |
| Product name | CR 20-12 A-GJ-A-E-HQQE |
| Product no | 96621872 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 2923 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rated flow | 21 m³/h |
| Rated head | 142.7 m |
| Selected liquid temperature (°C) | 20 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 50 |
| Size of outlet connection | DN 50 |
| Stages | 12 |
| Temperature (°C) | 25 bar / -20 |
| Type of connection | ANSI / JIS |
96621872