Grundfos 96082125 CR 1-9 A-FGJ-A-E-HQQE 3PH 1HP TEFC 60HZ
- Write a review
$2,307.22
ApprovalsCURUSApprovals for drinking waterNSF/ANSI 61BaseCast ironBearingSICCode for rubberECode for shaft sealHQQEConnect codeFGJCoolingTEFCCos phi - power factor0.81-0.72Curve tolerance2012 3BDensity998.2 kg/m³Density (lb/ftBi)62.29Enclosure class (IEC 34-5)55 Dust/JettingFlange rating inlet250 lbFlange size56CFlange size for motor56CFull load SF current4,0-3,9/1,95 AHP1IE Efficiency classNEMA Premium / IE3 60HzImpellerStainless steelImpellers9Insulation class (IEC 85)FLiquid temperature range (°C)-20 - 120Low NPSHNMains frequency60 HzMaterial codeAMax ambient temperature (F)140Max pressure (psi)363Max pressure at stated temp (°C)25 bar / 120Maximum ambient temperature (°C)60Maximum head79.4 mMaximum operating pressure (bar)25ModelAMotor efficiency at 1/2 load78.5-76.0 %Motor efficiency at 3/4 load81.0-80.0 %Motor efficiency at full load77.0-77.0 %Motor no85900703Motor standardNEMAMotor type71BBNumber of poles2Number of reduced-diameter impellers0Pipe connection1 1/4 inPower (P2) required by pump0.75 kWPressure rating for connectionPN 25Product nameCR 1-9 A-FGJ-A-E-HQQEProduct no96082125Pump orientationVerticalPump speed on which pump data are based3484 RPMPump versionAPumped liquidWaterRate flow (gpm)9.69Rated current3,25-3,35/1,68 ARated flow2.2 m³/hRated head58.1 mRated power - P20.75 kWRated speed3430-3460 RPMRated voltage3 x 208-230YY/460Y VSelected liquid temperature (°C)20Service factor1.25Shaft seal arrangementSingleSize of inlet connectionDN 25/32Size of outlet connectionDN 25/32Stages9Starting current590-650 %Temperature (°C)25 bar / -20Temperature range (F)-4 - 248Type of connectionDIN / ANSI / JIS
Specifications
| Approvals | CURUS |
| Approvals for drinking water | NSF/ANSI 61 |
| Base | Cast iron |
| Bearing | SIC |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | FGJ |
| Cooling | TEFC |
| Cos phi - power factor | 0.81-0.72 |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Density (lb/ftBi) | 62.29 |
| Enclosure class (IEC 34-5) | 55 Dust/Jetting |
| Flange rating inlet | 250 lb |
| Flange size | 56C |
| Flange size for motor | 56C |
| Full load SF current | 4,0-3,9/1,95 A |
| HP | 1 |
| IE Efficiency class | NEMA Premium / IE3 60Hz |
| Impeller | Stainless steel |
| Impellers | 9 |
| Insulation class (IEC 85) | F |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Mains frequency | 60 Hz |
| Material code | A |
| Max ambient temperature (F) | 140 |
| Max pressure (psi) | 363 |
| Max pressure at stated temp (°C) | 25 bar / 120 |
| Maximum ambient temperature (°C) | 60 |
| Maximum head | 79.4 m |
| Maximum operating pressure (bar) | 25 |
| Model | A |
| Motor efficiency at 1/2 load | 78.5-76.0 % |
| Motor efficiency at 3/4 load | 81.0-80.0 % |
| Motor efficiency at full load | 77.0-77.0 % |
| Motor no | 85900703 |
| Motor standard | NEMA |
| Motor type | 71BB |
| Number of poles | 2 |
| Number of reduced-diameter impellers | 0 |
| Pipe connection | 1 1/4 in |
| Power (P2) required by pump | 0.75 kW |
| Pressure rating for connection | PN 25 |
| Product name | CR 1-9 A-FGJ-A-E-HQQE |
| Product no | 96082125 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3484 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rate flow (gpm) | 9.69 |
| Rated current | 3,25-3,35/1,68 A |
| Rated flow | 2.2 m³/h |
| Rated head | 58.1 m |
| Rated power - P2 | 0.75 kW |
| Rated speed | 3430-3460 RPM |
| Rated voltage | 3 x 208-230YY/460Y V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.25 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 25/32 |
| Size of outlet connection | DN 25/32 |
| Stages | 9 |
| Starting current | 590-650 % |
| Temperature (°C) | 25 bar / -20 |
| Temperature range (F) | -4 - 248 |
| Type of connection | DIN / ANSI / JIS |
96082125