GPI 503000-72 PRO20-115PO/QM150L8N AC ELECTRIC FUEL TRANSFER VANE PUMPS GPRO

ApplicationsOwners ManualPRO20-115 SERIES OVERVIEWThe GPRO PRO20-115/QM is the perfect pump and meter combination that delivers flow rates up to 20 GPM (76 L/min) and provides precision fuel measurements for more accurate readings. The PRO20-115 professional-grade fuel transfer pump is the pump of choice for agricultural and construction applications with low viscosity petroleum fuels such as gasoline, diesel fuel, and kerosene. Available in a variety of configurations to meet your application's needs.BENEFITS INCLUDE:Extreme accuracy of QM meterCenter base inlet with check valveVacuum breaker readyExtended duty cycle exceeds industry standardsThermally protected motorField replaceable switch and vanesN/AN/APECIFICATIONSThe PRO20-115 and PRO20-230 fuel pumps are de signed to safely transfer low viscosity petroleum fuels such as gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene. The pumps are designed for permanent mounting on vented storage tanks, either in-ground or above-ground. RAINPROOF for outdoor use. Use of alcohol blends above 10% (E10) and biodiesel blends above 5% (B5) have not been reviewed by UL.PerformancePump Rate: PRO20-115: Up to 20 GPM (76 LPM)PRO20-230: Up to 20 GPM (76 LPM) @ 60 HzUp to 17 GPM (64 LPM) @ 50 HzDuty Cycle: 30 minutes ON, 30 minutes OFFDry Prime: 15 ft. (4.6 m) maximumDischarge Lift: 10 ft. (3 m) maximumOperating Temperature-20° F to +125° F (-29° C to +52° C)XTS Operating TemperatureExtreme Temperature Series pumps are capable of operation down to -40° F. Any pump operation below -20° F has not been evaluated by UL.Bypass Pressure 22 PSIInput: PRO20-115: 115 VAC, 60 HzPRO20-230: 220-240 VAC, 50-60 HzConduit: ½ inch FNPTCurrent Draw: PRO20-115: 4.9 amps at full loadPRO20-230: 2.3 amps on 60 Hz2.5 amps on 50 Hzat full load on 230 VACMotor: PRO20-115: 1/3 HP, 1725 RPMPRO20-230: 1/3 HP, 1725 RPM on 60 Hz or .19 kw, 1425 RPM on 50 Hz