Grundfos 99915870 CR 1-25 A-FGJ-A-V-HQQV Vertical Multistage Centrifugal Pump
- Write a review
$7,923.61
ApprovalsCURUSBaseCast ironBearingSICBuilt-in motor protectionPTOCode for rubberVCode for shaft sealHQQVConnect codeFGJCoolingIC 411Cos phi - power factor0.99Curve tolerance2012 3BDensity998.2 kg/m³Enclosure class (IEC 34-5)IP55Flange rating inlet250 lbFlange size for motor182TCFull load SF current27.8/12.1 AIE efficiency80.0%ImpellerStainless steelImpellers25Insulation class (IEC 85)FLiquid temperature range (°C)-20 - 90Low NPSHNMains frequency60 HzMaterial codeAMax pressure at stated temp (°C)25 bar / 90Maximum ambient temperature (°C)40Maximum head222.8 mMaximum operating pressure (bar)25ModelAMotor efficiency at 1/2 load73.0 %Motor efficiency at 3/4 load78.0 %Motor efficiency at full load80.0 %Motor no99883322Motor standardNEMAMotor typeWEGNumber of poles2Number of reduced-diameter impellers0Power (P2) required by pump2.2 kWPressure rating for connectionPN 25Product nameCR 1-25 A-FGJ-A-V-HQQVProduct no99915870Pump orientationVerticalPump speed on which pump data are based3457 RPMPump versionAPumped liquidWaterRated current24,2/19,7-12,1 ARated flow2.2 m³/hRated head165.8 mRated power - P22.2 kWRated speed3510 RPMRated voltage1 x 115/208-230 VSelected liquid temperature (°C)20Service factor1.15Shaft seal arrangementSingleSize of inlet connectionDN 25/32Size of outlet connectionDN 25/32Stages25Starting current700-700 %Temperature (°C)25 bar / -20Type of connectionDIN / ANSI / JIS
Specifications
| Approvals | CURUS |
| Base | Cast iron |
| Bearing | SIC |
| Built-in motor protection | PTO |
| Code for rubber | V |
| Code for shaft seal | HQQV |
| Connect code | FGJ |
| Cooling | IC 411 |
| Cos phi - power factor | 0.99 |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Enclosure class (IEC 34-5) | IP55 |
| Flange rating inlet | 250 lb |
| Flange size for motor | 182TC |
| Full load SF current | 27.8/12.1 A |
| IE efficiency | 80.0% |
| Impeller | Stainless steel |
| Impellers | 25 |
| Insulation class (IEC 85) | F |
| Liquid temperature range (°C) | -20 - 90 |
| Low NPSH | N |
| Mains frequency | 60 Hz |
| Material code | A |
| Max pressure at stated temp (°C) | 25 bar / 90 |
| Maximum ambient temperature (°C) | 40 |
| Maximum head | 222.8 m |
| Maximum operating pressure (bar) | 25 |
| Model | A |
| Motor efficiency at 1/2 load | 73.0 % |
| Motor efficiency at 3/4 load | 78.0 % |
| Motor efficiency at full load | 80.0 % |
| Motor no | 99883322 |
| Motor standard | NEMA |
| Motor type | WEG |
| Number of poles | 2 |
| Number of reduced-diameter impellers | 0 |
| Power (P2) required by pump | 2.2 kW |
| Pressure rating for connection | PN 25 |
| Product name | CR 1-25 A-FGJ-A-V-HQQV |
| Product no | 99915870 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3457 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rated current | 24,2/19,7-12,1 A |
| Rated flow | 2.2 m³/h |
| Rated head | 165.8 m |
| Rated power - P2 | 2.2 kW |
| Rated speed | 3510 RPM |
| Rated voltage | 1 x 115/208-230 V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.15 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 25/32 |
| Size of outlet connection | DN 25/32 |
| Stages | 25 |
| Starting current | 700-700 % |
| Temperature (°C) | 25 bar / -20 |
| Type of connection | DIN / ANSI / JIS |
99915870