Grundfos 96084743 CRI 5-11 A-FGJ-I-V-HQQV 1PH 5HP TEFC 60HZ
- Write a review
$3,395.89
Actual impeller diameter73.2 mmApprovalsCURUSBaseStainless steelBearingSICCode for rubberVCode for shaft sealHQQVConnect codeFGJCoolingTEFCCurve tolerance2012 3BDensity998.2 kg/m³Density (lb/ftBi)62.29DOE pump energy index CL0.89Enclosure class (IEC 34-5)IP54Flange rating inlet300 lbFlange size182TCFlange size for motor182TCFull load SF current27.0-25.0 AHP5IE efficiency80.0%ImpellerStainless steelImpellers11Insulation class (IEC 85)FLiquid temperature range (°C)-20 - 90Low NPSHNMains frequency60 HzMaterial codeAMax ambient temperature (F)104Max pressure (psi)363Max pressure at stated temp (°C)25 bar / 90Maximum ambient temperature (°C)40Maximum head108.7 mMaximum operating pressure (bar)25ModelAMotor efficiency at full load80.0 %Motor no85700012Motor standardNEMAMotor typeBALDORNumber of poles2Number of reduced-diameter impellers0Pipe connection1 1/4 inPower (P2) required by pump3.7 kWPressure rating for connectionPN 25Product nameCRI 5-11 A-FGJ-A-V-HQQVProduct no96084743Pump orientationVerticalPump speed on which pump data are based3468 RPMPump versionAPumped liquidWaterRate flow (gpm)30.4Rated current24.0-22.0 ARated flow6.9 m³/hRated head80.7 mRated power - P23.7 kWRated speed3450 rpmRated voltage1 x 208-230 VSelected liquid temperature (°C)20Service factor1.15Shaft seal arrangementSingleSize of inlet connectionDN 25/32Size of outlet connectionDN 25/32Stages11Temperature (°C)25 bar / -20Temperature range (F)-4 - 194Type of connectionDIN / ANSI / JIS
Specifications
| Actual impeller diameter | 73.2 mm |
| Approvals | CURUS |
| Base | Stainless steel |
| Bearing | SIC |
| Code for rubber | V |
| Code for shaft seal | HQQV |
| Connect code | FGJ |
| Cooling | TEFC |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| Density (lb/ftBi) | 62.29 |
| DOE pump energy index CL | 0.89 |
| Enclosure class (IEC 34-5) | IP54 |
| Flange rating inlet | 300 lb |
| Flange size | 182TC |
| Flange size for motor | 182TC |
| Full load SF current | 27.0-25.0 A |
| HP | 5 |
| IE efficiency | 80.0% |
| Impeller | Stainless steel |
| Impellers | 11 |
| Insulation class (IEC 85) | F |
| Liquid temperature range (°C) | -20 - 90 |
| Low NPSH | N |
| Mains frequency | 60 Hz |
| Material code | A |
| Max ambient temperature (F) | 104 |
| Max pressure (psi) | 363 |
| Max pressure at stated temp (°C) | 25 bar / 90 |
| Maximum ambient temperature (°C) | 40 |
| Maximum head | 108.7 m |
| Maximum operating pressure (bar) | 25 |
| Model | A |
| Motor efficiency at full load | 80.0 % |
| Motor no | 85700012 |
| Motor standard | NEMA |
| Motor type | BALDOR |
| Number of poles | 2 |
| Number of reduced-diameter impellers | 0 |
| Pipe connection | 1 1/4 in |
| Power (P2) required by pump | 3.7 kW |
| Pressure rating for connection | PN 25 |
| Product name | CRI 5-11 A-FGJ-A-V-HQQV |
| Product no | 96084743 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3468 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rate flow (gpm) | 30.4 |
| Rated current | 24.0-22.0 A |
| Rated flow | 6.9 m³/h |
| Rated head | 80.7 m |
| Rated power - P2 | 3.7 kW |
| Rated speed | 3450 rpm |
| Rated voltage | 1 x 208-230 V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.15 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 25/32 |
| Size of outlet connection | DN 25/32 |
| Stages | 11 |
| Temperature (°C) | 25 bar / -20 |
| Temperature range (F) | -4 - 194 |
| Type of connection | DIN / ANSI / JIS |
96084743