Chicago-Latrobe 11124 1/2 12 IN A/C EXTENSION DRILL
- Write a review
$56.67
Applicable MaterialsAlloy Steel, Carbon Steel and Cast IronCutting Depth4-1/2 inCutting DirectionRight HandCutting Edge MaterialHSSDrill Size - Decimal Inch0.5 inDrill Size - Fraction1/2 inFinishBlack OxideFlute Length4-1/2 inFlute TypeSpiralMaterialHSSOverall Length12 inPoint Angle135 degPoint TypeSplitSeries912Shank Size1/2 inShank TypeStraightStyle912Surface ConditionSteam OxideTool Size1/2"TypeType B Extra Length
Specifications
| Auxiliary lip | Yes |
| Design | CRWA1 |
| Housing bore diameter | 41.25 mm, 1.624 in |
| Maximum operating temperature | 100.0 °C, 212.0 °F |
| Maximum operating temperature (°F) | 100.0 °C, 212.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 5.57 m/s |
| Rotational speed | 3720.0 r/min |
| Seal width | 6.35 mm, 0.25 in |
| Sealing lip material | Nitrile rubber (NBR) |
| Shaft diameter | 28.58 mm, 1.125 in |
| Type of outside diameter | Metal-cased with sealant coating on the outside diameter |
| Unit system | Inch |
11124
